Does anyone know the diamter of tubing needed for the MS1 MAP sensor? - Club Protege

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

Hadoken

Back to BP power

Join Date: Sep 2004

Posts: 974
#1

Does anyone know the diamter of tubing needed for the MS1 MAP sensor?

08-14-2009, 02:21 PM

As the title says. I'm at work right now and the MS is at home so I have nothing to reference to, but a lot of different tubing to pick from here. So I need to know what size to grab for the built in MAP sensor so I can take some tubing home and see if I can't get the car to run with the MS plugged in.

1/4" looks about right from what I remember but I'm not sure.

Not the sports page Not a magazine
Tags: None
therieldeal

Riel Performance Parts

Join Date: Oct 2005

Posts: 11767
#2

08-14-2009, 03:01 PM

4mm id or around there should do it

i just measured mine with a caliper. standard 2.5 bar sensor.

Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
Hadoken

Back to BP power

Join Date: Sep 2004

Posts: 974
#3

08-14-2009, 03:31 PM

Cool. I'll probably just grab a bunch of different sizes around 4mm and hope something works.

Not the sports page Not a magazine
Comment
therieldeal

Riel Performance Parts

Join Date: Oct 2005

Posts: 11767
#4

08-14-2009, 03:36 PM

it tapers from 3.5mm at the tip to 4.5mm at the base

Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment

Previous template Next

Working...

X