Announcement

Collapse
No announcement yet.

TTL Bushings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    TTL Bushings

    So it's time for all new bushings on the 4wd. I was reading this thread about Superpro, and wondered if anybody had already used these TTL bushings.

    Or had measured the size of the bushings in the rear TTL.

    If they only fit MX-3s, could I use the longer TTLs without stretching the axles too much?
    1990 Protege 4WD
    GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

    1 3 5
    ├┼┤
    2 4 R


    Seeking: Canadian 4WD seatbelts.


    #2
    Seriously?? 32 views and no reply?

    Surely you're not all using original bushings.....
    1990 Protege 4WD
    GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

    1 3 5
    ├┼┤
    2 4 R


    Seeking: Canadian 4WD seatbelts.

    Comment


      #3
      if i had an answer for you i would let you know. im still running on stock bushings
      91 protege gt. dropzone mx3 springs, mx3 crossmember, ractive front and rear strut braces, rear lower mx3 brace, 4 wheel disc brakes, corksport ss brake and clutch lines,kvr front pads, ractive cai,ram air hood scoop, modified front bumper, shaved ant and rear trunk lock, fubu ant, short shifter, corksport bronzeoil shifter bushings,92 glass sunroof and tail lights, mx3 center console, autometer gauges (volt and oil pressure) cluster needles painted to match, sound system, 17 inch eagle alloy 193 with 205 40 17 rubber. klze is ALIVE BABY!! . http://www.cardomain.com/ride/2394656http://www.toprotege.com/forums/show...hlight=project[url]

      Comment


        #4
        Originally posted by progt91 View Post
        im still running on stock bushings
        I guess we all are. I'll post measurements when I take mine apart.
        1990 Protege 4WD
        GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

        1 3 5
        ├┼┤
        2 4 R


        Seeking: Canadian 4WD seatbelts.

        Comment

        Working...
        X