Announcement

Collapse
No announcement yet.

Removing 3rd gen side moldings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Removing 3rd gen side moldings

    just wanted to make sure it is painted underneath them and how to remove them, and if there is anything i should worry about i have a 99lx thank you.

    and one last thing does anyone know if they will ever make a carbon fiber trunk for the pro?
    Last edited by Drackonn; 01-19-2004, 11:45 PM.

    #2
    Yes, there is paint underneath the molding. You will need plenty of Goo Gone or Goof-Off and dental floss.

    As far as I know there are no CF trunks for the Protege.
    Clint/1999 "Sport20"

    Comment


      #3
      Make sure you got plenty of spare time to if you are going to do this. With a 99 that glue is really going to be stuck on there.

      Comment


        #4
        And make sure you clean the **** out of the spots that you use it, b/c it is reallty bad on the paint.
        2000 DX, Blue
        Eibach Pro-Kit, MSP Struts, 16" Kosei's on Honkook Ventus HR-II's(205-45-16), MSP Exhaust, Injen CAI, MSP Strut Tower Bar, NGK Wires
        2 JL Audio 10w3-d4's in a sealed box, Rockford 500s amp, 2 6x9 Pioneer Premier 4-ways, 2 6x8 Kenwood Excelon 3-ways, Rockford 301x amp, Pioneer Premier DEH-P650, Dynamat in some fun places.....

        Comment

        Working...
        X