Announcement

Collapse
No announcement yet.

Any interest in 2nd. gen. fiber hood ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Any interest in 2nd. gen. fiber hood ?

    First of all I have my hood all covered with a stone chips. It was painted in july and I'm really upset about it. There's basicly two things I can do now. First one is to repaint it which will cost me some money, let's say 150$ CAD. The other option is to get a fiber hood.
    The problem I run in to, is luck of people interested in getting one. I've seen some groop buys, but they're going nowhere .

    There's a deal I found and I need 9 more people for it.
    It doesn't metter for me to get it from this guy or someone else, as soon as I'll have it before spring .


    "
    Ok to start off I belive the cost per hood wil be around 250.00 to
    325.00
    but it all depends on if you want the hood to be fully functional ?
    I build all my hoods to fit factory hinges so you wont need any hood
    pins
    you can use all your factory
    hardware.
    I would need at least 10 orders in order for it to be worth my while to
    make
    these hoods.
    As I have told you it cost me around 1000.00 just for me to make the
    mold
    for the hood.
    If there is any thing els you would like to know please email me back.
    Thanks

    I would require 1/2 down per hood to
    start, and
    the remainder when the hood is finished.
    Shipping hoods are not cheap so I would like to arrange a shipping
    cost.

    On another note, the underside of the hood looks just as good as the
    outside. It's a full-finished underliner. I won't make or sell any
    garbage.
    Thanks.


    P.S. I would also need a stock hood to start. Whoever donates the
    stock
    hood will get their hood at 1/2 price.
    "
    98 protege LX for appearance
    89 626 GT for performance

    #2
    Ill donate my hood (then I can have the JDM scoop too)!
    Is this guy in Canada?

    CLICK HERE FOR PICS
    1.8L 97 LX (CDN)
    Erebuni kit, JDM heads/corners/tails/hood scoop, 17" BSA 259 w/ Khumo Ecstas, KYB GR2 struts, Apex springs, Ractive X-drilled/slotted rotors, KVR C/F pads, EssentialSpeed CAI, Essentialspeed custom cat-back (y-piped with dual Vibrant mufflers), Clutch Masters clutch, touring wing, Vibrant F/R strut bar, AWR 21.5mm rear sway bar, indiglo gauges, Sparco wheel/shift knob, custom interior, TomMotorsports 'BRIDE' seats, Innovatek DVD-0181 DVD/CD/MP3/etc player, Innovatek IN-720 7" indash LCD, 'MZDASPD' plates

    Comment


      #3
      Yep. This is his e-mail if you'll need some info hurricanefibers@cogeco.ca. I'm not sure where exactly, I guess Toronto area.
      Do you think it wil be possible to find enough people? I check protegeclub and there was a thread with about 10 people interested.
      98 protege LX for appearance
      89 626 GT for performance

      Comment

      Working...
      X