Changes to be done:
-Install E153 trans
-Clean up wiring in engine bay
-Remove A/C and P/S
-Install MX-3 GS steering rack
-???
I don't have any pics of the adapter plate right now, but you can see what it looks like from the cardboard prototype. This is not Tim's/Jon's - I made my own.
So far I've only made the passenger and driver side mounts. Won't get much more done during the holidays, but atleast I've got the engine mounted the way I want (7/16" closer to the passenger side and 1" forward).
Next, I have to make a new crossmember (or modify the stock one) and then the front/rear mounts. I also still need to notch the frame rail. Then comes the shifter and a bunch of other stuff.
--Ferdi
-Install E153 trans
-Clean up wiring in engine bay
-Remove A/C and P/S
-Install MX-3 GS steering rack
-???
I don't have any pics of the adapter plate right now, but you can see what it looks like from the cardboard prototype. This is not Tim's/Jon's - I made my own.
So far I've only made the passenger and driver side mounts. Won't get much more done during the holidays, but atleast I've got the engine mounted the way I want (7/16" closer to the passenger side and 1" forward).
Next, I have to make a new crossmember (or modify the stock one) and then the front/rear mounts. I also still need to notch the frame rail. Then comes the shifter and a bunch of other stuff.
--Ferdi
Comment