Hi all,
I have spoken to bpt323 about posting this topic, if anyone wants a verification of my selling reputation, please visit www.fordlaser.com and i have been on there for years, have sold plenty of parts. Also no problem to do a paypal transaction, direct deposit via web banking, or even COD if your post company allows it. All parts can be posted worldwide at the buyers expense but ill do my best my end to minimise postage costs. All items are located in Perth Western Australia.
I have plenty of other high end BPT parts and if i dont have it, i can get it.
Item 1
Albins Engineering 1 thru 5 dogbox, this is a no holes barred rally box. Helical cut gears with dog engagement on 1 thru 5 forward gears. Short throw selector rods and also has the bearing plate reinforcement between 5th gear cap and the main case. This box has short ratios to suit a rally car, it will top out at about 170-180km/h. Please note, 2nd and 3rd gears are damaged and require replacement, parts are still availible through albins here in AUS, i can either purchase these, and have the box reassembled. Or the buyer can purchase the box and organise on their own behalf.
Price $4500AUD repaired, $1500 as is (bout 2k to fix it)
Photos of gears
Box
Video of box in operation to demonstrate ratios
Item 2
Sachs single plate rally/race clutch on modified flywheel. Comes with cover, bolts, pressure plate, disc and a severley modified, balanced and drilled flywheel to suit. Comes on fairly hard, however has some slip due to sprung centre ceremetallic disc, if you want on off operation you can change for a stinted steel solid centre disc, but for a streetable car i wouldnt reccomend that. Suited for cars up to 380whp or so. The disc is brand new and would have only seen 500km of road use, no competition since purchase of new disc.
Price - $650 AUD
Pictures
Item 3
PAR engineering Chromoly flywheel (5kg) and Xtreem 4 puck button clutch, pressure plate has been modified for 20% extra clamp on what was already a heavy duty plate. Flywheel is no more than 5000km old and was purchased from PAR engineering last year. I spat a rear main and this disc has contacted some oil, so its priced so you can get a new disc.
Price - $600 AUD (flywheel cost me 650 alone)
Item 4
Compomotive rally wheels for 4 stud BG/KF/Escort/Astina 15x5JJ
Most have a few scratches from rocks (what can you expect of rally wheels), and could do with a paint. Have 9 in total, all with rally tyres if you want them
They clear RX7 4 pots and you will need to have rather long wheel studs to make them fit, they are super thick at the bolting part of the wheel.
Price - $500 AUD the lot
Pictures
Let me know if you are interested in any part or require further information
And i have plenty and i mean plenty of BG gtx stuff if you need it, just reply here or PM
Cheers
Josh Gardner
I have spoken to bpt323 about posting this topic, if anyone wants a verification of my selling reputation, please visit www.fordlaser.com and i have been on there for years, have sold plenty of parts. Also no problem to do a paypal transaction, direct deposit via web banking, or even COD if your post company allows it. All parts can be posted worldwide at the buyers expense but ill do my best my end to minimise postage costs. All items are located in Perth Western Australia.
I have plenty of other high end BPT parts and if i dont have it, i can get it.
Item 1
Albins Engineering 1 thru 5 dogbox, this is a no holes barred rally box. Helical cut gears with dog engagement on 1 thru 5 forward gears. Short throw selector rods and also has the bearing plate reinforcement between 5th gear cap and the main case. This box has short ratios to suit a rally car, it will top out at about 170-180km/h. Please note, 2nd and 3rd gears are damaged and require replacement, parts are still availible through albins here in AUS, i can either purchase these, and have the box reassembled. Or the buyer can purchase the box and organise on their own behalf.
Price $4500AUD repaired, $1500 as is (bout 2k to fix it)
Photos of gears
Box
Video of box in operation to demonstrate ratios
Item 2
Sachs single plate rally/race clutch on modified flywheel. Comes with cover, bolts, pressure plate, disc and a severley modified, balanced and drilled flywheel to suit. Comes on fairly hard, however has some slip due to sprung centre ceremetallic disc, if you want on off operation you can change for a stinted steel solid centre disc, but for a streetable car i wouldnt reccomend that. Suited for cars up to 380whp or so. The disc is brand new and would have only seen 500km of road use, no competition since purchase of new disc.
Price - $650 AUD
Pictures
Item 3
PAR engineering Chromoly flywheel (5kg) and Xtreem 4 puck button clutch, pressure plate has been modified for 20% extra clamp on what was already a heavy duty plate. Flywheel is no more than 5000km old and was purchased from PAR engineering last year. I spat a rear main and this disc has contacted some oil, so its priced so you can get a new disc.
Price - $600 AUD (flywheel cost me 650 alone)
Item 4
Compomotive rally wheels for 4 stud BG/KF/Escort/Astina 15x5JJ
Most have a few scratches from rocks (what can you expect of rally wheels), and could do with a paint. Have 9 in total, all with rally tyres if you want them
They clear RX7 4 pots and you will need to have rather long wheel studs to make them fit, they are super thick at the bolting part of the wheel.
Price - $500 AUD the lot
Pictures
Let me know if you are interested in any part or require further information
And i have plenty and i mean plenty of BG gtx stuff if you need it, just reply here or PM
Cheers
Josh Gardner
Comment