Hey this is for u Blue LEDz! (And anyone else with info!)
ok, so i bought 2 amps for my car; 1 for the sub, and 1 for the other speakers. (fyi, max watts is 680W for both subs added together)
here's the idea . . .
for power, there would be one "wire" connecting from. . .
BATTERY 12v -> power lead -> 60A fuse -> power terminal of 600w amp -> power terminal of 80w amp
for ground, there would be one "wire" connecting from. . .
ground term of 80w amp -> ground term of 600w amp -> chassis/frame
is this ok? i am trying to do it this way to bypass having to buy distributor blocks and running two separate leads for each amp.
next issue! . . .
i read on crutchfield that a relay is recommended for the turn-on lead for the 2 amps or else i might short out that circuit in my HU.
is that true? before reading that article, i was just goin to run one wire connecting from. . .
HU turn-on lead -> 600w amp turn-on -> 80w amp turn-on
feeeeeedback plllss!
ok, so i bought 2 amps for my car; 1 for the sub, and 1 for the other speakers. (fyi, max watts is 680W for both subs added together)
here's the idea . . .
for power, there would be one "wire" connecting from. . .
BATTERY 12v -> power lead -> 60A fuse -> power terminal of 600w amp -> power terminal of 80w amp
for ground, there would be one "wire" connecting from. . .
ground term of 80w amp -> ground term of 600w amp -> chassis/frame
is this ok? i am trying to do it this way to bypass having to buy distributor blocks and running two separate leads for each amp.
next issue! . . .
i read on crutchfield that a relay is recommended for the turn-on lead for the 2 amps or else i might short out that circuit in my HU.
is that true? before reading that article, i was just goin to run one wire connecting from. . .
HU turn-on lead -> 600w amp turn-on -> 80w amp turn-on
feeeeeedback plllss!
Comment