Announcement

Collapse
No announcement yet.

HID's wont work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HID's wont work

    Well a while back me and a buddy put in some HID's in his low beams, worked perfect. He decided he wanted to get HID fogs and high-beams as well.
    first we did the fogs and turned them on to see if they worked. only the left one worked so we unplugged them and switched them, still just the left one working. I checked and and there was 12.xx volts at the right side. and both bulb setups worked on the left side. then the high beams didn't work at all, neither side in any combo..
    I'm totally baffled by this.
    -Steve

    94' Protege < Worklog<SOLD!
    VF10 powered!
    262 Whp & 257 Wtq
    13.1@107

    '02 Suzuki Bandit 600s

    #2
    Are the ballasts ok?

    Comment


      #3
      Yeah, both ballasts were fine. we ended up getting a relay harness with heavier gauge wiring and that solved the problem.
      -Steve

      94' Protege < Worklog<SOLD!
      VF10 powered!
      262 Whp & 257 Wtq
      13.1@107

      '02 Suzuki Bandit 600s

      Comment


        #4
        Oops, didn't realize the post was from 4 months ago... not very lively board, this one

        Comment


          #5
          Yeah, this section isn't all that active but it's here none the less. Hopefully we will get more active sometime in the future.
          -Steve

          94' Protege < Worklog<SOLD!
          VF10 powered!
          262 Whp & 257 Wtq
          13.1@107

          '02 Suzuki Bandit 600s

          Comment

          Working...
          X