Anyone have any experience with the megan racing adj. rear control arms for the 323 along with adj trailing arms? according to horsepowerfreaks.com, their product/part #s will fit all models up to 05 (did they make a 323 in 05?). Did the bf suspension remain that unmodified for that long?
Announcement
Collapse
No announcement yet.
Yes, I know, too many, but......Megan racing
Collapse
X
-
I ordered the front and rear rear control arms on tuesday, thursday they call me and say that the control arms were R and D'd for the 94 and fit up to an 05. My reply was "why the heck do you have it listed as up to 05?" and the guy checks the website and says that it states 94 to 05. I then inform him that I have an email that says otherwise and after some investigation he discovers they changed the page that morning! So, in retrospect I am happy they called me and warned me after reading my notes ( I mentioned they were for an 88) and kudos to them, and their expedience in realizing that there was a problem and fixed it. I took the plunge and ordered them anyway, and who knows, maybe I will have some success. I will keep all posted, any input would be awesome, thanks.
Comment
-
Most likely it's the BHA-BJ stuff.
Remember in Japan BG started in 89.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
Originally posted by concealer404 View PostSo does this mean that they would fit a BG chassis, or am i missing something huge here?
Comment
-
They will definately NOT work in stock form! Way too long, and no perches on the front set for anti-sway bar. Anyone with a 95 or newer protege that wants the fronts and rears for 150+shipping? Never used, I can garuntee it. Now for the modification possibilities. I could cut them down and re-thread and maybe make them work. It comes down to bushing angle and diameters are going to work. I can possibly get the perches needed welded on. Just a tab of steel with a 1/4" hole drilled in it. I will investigate further possibilities, if anyone wants em, speak up before I destroy them!
Comment
Comment