Announcement

Collapse
No announcement yet.

BPT into GTX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    BPT into GTX

    so as you may know, or may not,from my other thread, my gtx b6t had an unexplained head knock and no matter what i did it was still there. soo i bought a bpt :@)

    my question is if my wiring harness and ecu from my b6t will work? i searched and didn't really find a definite yes or no.. the motor i bought has everything (motor trans axles etc. but no wiring or ecu.)

    also is it a direct swap? or am i gonna need new mounts or exhaust or something?

    thanks for your help!

    #2


    that might help you out a bit.
    88 Mazda GTX- rusted dalmation, it runs?
    00 Ford ZX2- red terd, mods: slow
    00 Ford ZX2- purple ricerocket, 302whp/298wtq - SOLD

    Comment


      #3
      You can use the B6T ECU, sensors, and wiring harness, but there are a few Protege bits to be used as well (auto TPS, IIRC).

      Comment


        #4
        ^also use the bpt injectors
        "See that car, in the 80's that car was deadly." Random man to his son while passing the GTX in a parking lot

        Originally posted by neuspeedescort
        the proper spelling would be "Launchabilitiness" i do believe.
        -88' Mazda 323 GTX, 1.8t, Modified Magazine May 2012
        -88' Mazda 323 GTX, caged and ready for dirt
        -93' Mazda Miata, half caged
        -09' Mercedes C63 AMG
        -87' Toyota Land Cruiser, 33's with slight lift, safari style!

        Comment


          #5
          I'm running a BP05 +T on B6T harness, ecu, and injectors. Running 10psi on a VJ20/tbird hybrid with no AFR problems. Need the BP TPS, but it doesn't play perfectly with the b6t ecu, at least mine has not for me so far.
          1991 Capri XR2 "GTXR2" BPT AWD Bastardization/conversion
          1991 Isuzu Impulse RS Turbo AWD

          Creator of the B6T Rocketchip
          www.werbatfik.com

          Comment


            #6
            i used a microtech stand alone system with my bpt swap into my bf gtx. bottom 2 motor mounts worked fine. tranny mount and other side motor mount i had to custom make. just got my car runnin about a week ago. and i have to admit. its way faster than i ever imagined and puts a smile on my face every time i push the pedal down

            Comment

            Working...
            X