anyone got any maps they could email me. im running a bp, rx7 460 injectors, no vaf, with a big t3 turbo, and stock distributor. i cant get my car to run on the map lex put on it. pm me or email me at aspireguy95@yahoo.com thanks
Announcement
Collapse
No announcement yet.
ms2 maps
Collapse
X
-
The map was tested on a BP motor and it ran it without issues. The main problem I suspect is that you need to change the injector size from the stock 230cc to 460cc. In order to do this you will need to take the Req_Fuel parameter which is around 15.0ms and drop it down to the half of that value (around 8ms).
-
It was running much too rich with the 460ccs and the req_fuel set for 230s. You will see a drastic improvement once you change that value. It's also good to do some reading on the MS and get familiar with tuning it.
I know it's a little bit of heavy reading but it's worth it: http://www.megamanual.com/v22manual/mtune.htm
Comment
Comment