Announcement

Collapse
No announcement yet.

Greg`s MX3 worklog

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Greg`s MX3 worklog

    hey there this is my lil project!

    this is how i got it in 2007:




    the intirior is not for my taste but she was in good shape!!!

    first came tha rims!
    kosei rt mech 17" with 215/45/17 (that realy made the b6me slow...)



    time for a swap! bp from a 323f astina with a g tranny :D




    got the engine cover and the sway bar from a friend :D
    sigpicOf all the things i`ve lost.. i miss my mind the most....

    #2
    those redish seat are gone and now i have a set of a black leather intirior
    a bigger momo steering wheel and some gauge in there!





    At last on my way for some boooooost!!! :D





    and the engine is out .
    sigpicOf all the things i`ve lost.. i miss my mind the most....

    Comment


      #3
      a pile of parts from a mx-3 bp+t that i got :D







      The turbo is new from the other mx-3 but its a chinise turbocharger T3/T4...
      sigpicOf all the things i`ve lost.. i miss my mind the most....

      Comment


        #4
        Some internals for my bp
        cp pistons eagle rods and a set of gaskets










        and got the engine mounts filled with some kind of gooooood stuf :D

        sigpicOf all the things i`ve lost.. i miss my mind the most....

        Comment


          #5
          engine block and head back from the machineshop
          looooks goood :D







          some more pics from the block and head





          sigpicOf all the things i`ve lost.. i miss my mind the most....

          Comment


            #6
            opening up the intake so we can take out the vics :D



            and geting all back together with a new gmb water pump
            (used arp studs on the block and head)





            hopefuly this week i`l get the ms from lex (it got stuck in the customs i thing...) and wil start her up :D
            sigpicOf all the things i`ve lost.. i miss my mind the most....

            Comment


              #7
              looking good man! plan on running that turbo? what are the specs? what are your power goals?
              -Jack

              ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

              91 626 LX - basically stock and pretty slow still
              http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

              01 E53 3.0i - FOR SALE! pm if interested

              91 USDM Protege LX - SOLD! turbo/manifold up for sale!
              http://www.clubprotege.com/forum/showthread.php?t=46606

              Comment


                #8
                thank you!! thats the plan with that turbo but i am kind of afraid with it since its a
                chinnese turbo and no one knows how good it is! or what it is.... my power goals are around 300 to 350 bhp and hopping to find a solution abut the tranny!!!!!!
                and have to find a set of injectors to keep up with the whole setup..
                sigpicOf all the things i`ve lost.. i miss my mind the most....

                Comment


                  #9
                  looks like a good build :D keep it up

                  Comment


                    #10
                    Very nice, I'm jealous of you 4-cyl guys and your 50% fewer parts

                    She should pull pretty hard when done. Keep it up.
                    '90 Mazda 323 - V6 KLDE, supercharged, right-hand drive, build log
                    '93 Ford Probe GT - a few mods...
                    10.24 @ 139.5 mph [16 psi] - Timeslip
                    490whp, 447 wtq @ 20psi - Dyno sheet

                    Comment


                      #11
                      looking good. looking forward to some more updates
                      91 protege gt. dropzone mx3 springs, mx3 crossmember, ractive front and rear strut braces, rear lower mx3 brace, 4 wheel disc brakes, corksport ss brake and clutch lines,kvr front pads, ractive cai,ram air hood scoop, modified front bumper, shaved ant and rear trunk lock, fubu ant, short shifter, corksport bronzeoil shifter bushings,92 glass sunroof and tail lights, mx3 center console, autometer gauges (volt and oil pressure) cluster needles painted to match, sound system, 17 inch eagle alloy 193 with 205 40 17 rubber. klze is ALIVE BABY!! . http://www.cardomain.com/ride/2394656http://www.toprotege.com/forums/show...hlight=project[url]

                      Comment


                        #12
                        Nicer project
                        1993 Protege LX-Midnight's shadow SOLD
                        1996 Honda CBR600-Wrecked. Damn Honda crippled me
                        2002 mazda MPV-family truckster SOLD
                        2010 VW routon

                        Originally posted by jay
                        .....they totally underestimated the number of gearheads such as myself that have families but refuse to grow the hell up and stop playing with cars, or that otherwise see the utility of having 4 doors. Obviously I ain't alone, as there are a helluva lotta sti and evo here. Bueler? Beuler? Mazda? Mazda?

                        Comment


                          #13
                          thank you very much ppl!! :D (tHe block was machined to 0.5 + from stock)
                          prety safe for the bp
                          sigpicOf all the things i`ve lost.. i miss my mind the most....

                          Comment


                            #14
                            here are some random photos of the mx-3 donor dissasebly with the help of BAX and Tanner !! :D







                            as you can see the donor mx-3 had a bp+t with a custom intake that used
                            8 injectors (plus 4 in the intake) that was very very nasty work...
                            sigpicOf all the things i`ve lost.. i miss my mind the most....

                            Comment


                              #15
                              Keep walking with your friends, its a pretty nice project!

                              Comment

                              Working...
                              X