Announcement

Collapse
No announcement yet.

MS II ON FSDE anyone?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MS II ON FSDE anyone?

    Hi, I built an MS II V 3.0 for the FSDE (2001 protege) and i am trying to get it to work and I am not able to get it to start!... a little history first: I have the fuel setup working on the stock ignition and it was running fine, so I decided to hook up the ignition too, I was told that the COP with wasted spark would work with internal mods to use the ground switching mode with our stock COP's like so: http://www.msextra.com/doc/ms1extra/...anual.htm#neon

    I built this circuit and cant get the car to start, so i was wondering if anyone went this route, or knows a way to get the MS II to work on the FS..
    Help... this is my daily so I need her back online soon..

    Thanks in advance...

    #2
    Did you also make changes in the software so that you are triggering correctly and firing on both coil packs?

    Comment


      #3
      You mean the MS II extra firmware upgrade? What do I have to do other than that? I followed the Instructions in the megamanual.

      Comment


        #4
        Got it done, it was the trigger wheel setting I had wrong. up and running... thanks...

        Comment

        Working...
        X