Hey guys, been dealing with a nasty stumble. Can't get it figured out. I'm sure its something stupid but i'm new at MS so I guess thats to be expected.
The stumble happens as your are trying to accel through the gears. It feels like the engine is couphing. Then, if you pull out and give it like 3/4 throttle, it falls on its face and dies.
In the accel wizard in TS, the little ball doesnt travel along the AE curve in the settings graph. I havn't been able to figure why that is so I'm thinking thats whats causing the hesatation.
Here is my thread on the MS/E forums if anyone wants to look at the msq or datalogs. MSQ is in first post, logs are in the 8th.
http://www.msextra.com/forums/viewto...?f=101&t=37179
Besides this, the motor runs great!! Turbo spools alot faster than I thought it would. Its gonna be mean!!
Thanks for any help you can offer.
The stumble happens as your are trying to accel through the gears. It feels like the engine is couphing. Then, if you pull out and give it like 3/4 throttle, it falls on its face and dies.
In the accel wizard in TS, the little ball doesnt travel along the AE curve in the settings graph. I havn't been able to figure why that is so I'm thinking thats whats causing the hesatation.
Here is my thread on the MS/E forums if anyone wants to look at the msq or datalogs. MSQ is in first post, logs are in the 8th.
http://www.msextra.com/forums/viewto...?f=101&t=37179
Besides this, the motor runs great!! Turbo spools alot faster than I thought it would. Its gonna be mean!!
Thanks for any help you can offer.
Comment