PDA

View Full Version : Anyone interested in a KL swap?



defiler
12-15-2010, 12:32 PM
Just seeing if any local guys would be interested in some cheap parts. Ive got about 75% of what would be needed for a KL swap, and if someone local wants it, figured I'd see before I waste my time taking pictures and posting up the parts individually (even though I cant ship most of them)


MX3 GS manual trans
MX3 GS STS
MX3 GS black manual seat belts
MX3 GS intermediate shaft
MX3 GS crossmember
MX3 GS wiring harness
MX3 GS shift linkage
MX3 GS motor/transmission mounts
MX3 center console
20' if braided -5AN fuel line
KL engine fusebox
Millenia ZE IM. Everything attached to it still other than the TB.
SS braided lines and fittings

Honestly, if someone came with $100 Id probably let it all go. Tires of it taking up the room in the garage at this point.

mazdapr
01-08-2011, 06:40 PM
wow thats s steal. free bump. (wish you were closer i pick everything up)

defiler
01-19-2011, 03:33 AM
Yeah, I know. Wish someone would come take it. lol

irishkev90
01-19-2011, 06:49 AM
Damn, wish you were in New York. I'd take the engine/trans/etc in a heartbeat. Mmmm, a KL 2nd gen.

Tapatalk Pro on HTC Droid Incredible

defiler
01-21-2011, 05:18 AM
Yeah, KL 2g has been my dream for a while. But my priorities changed this past year and it isnt going to be possible for a few years now, so I figure rather than store the parts Id let a fellow enthusiast get it dirt cheap... but apparently other people are as cheap or as strapped for time as I am.:40oz:

Really, even a cool $50 right about now would seem fair for it.






On a side note, not sure if anyone in MN needs parts, but my old 2g Escort is in the Upull out here... and nobody has taken most of the stuff yet I noticed when I was out there last weekend...

Brand new (100 miles or so) rear pads and calipers
Manual seat belts from Canadian escort
New clutch and flywheel (OEM spec)
Brand new slave cylinder
brand new master cylinder
shaved EGT grill without broken tabs
new motor mounts from NAPA (under 5k miles)
Energy suspension poly tranny mount inserts
brand new Oreilley's fuel pump
cloth fitted dash cover
mx3 center console
minty fresh (clean) visors

progt91
01-21-2011, 09:13 AM
and you have to live that far away.

mac1
01-24-2011, 02:58 AM
^^^ what he said. I would give you twice your asking price and you could keep the engine.

mx-3_4evr
01-24-2011, 01:41 PM
Yeah, KL 2g has been my dream for a while. But my priorities changed this past year and it isnt going to be possible for a few years now, so I figure rather than store the parts Id let a fellow enthusiast get it dirt cheap... but apparently other people are as cheap or as strapped for time as I am.:40oz:
Really, even a cool $50 right about now would seem fair for it.
On a side note, not sure if anyone in MN needs parts, but my old 2g Escort is in the Upull out here... and nobody has taken most of the stuff yet I noticed when I was out there last weekend...
Brand new (100 miles or so) rear pads and calipers
Manual seat belts from Canadian escort
New clutch and flywheel (OEM spec)
Brand new slave cylinder
brand new master cylinder
shaved EGT grill without broken tabs
new motor mounts from NAPA (under 5k miles)
Energy suspension poly tranny mount inserts
brand new Oreilley's fuel pump
cloth fitted dash cover
mx3 center console
minty fresh (clean) visors

Hahahaha I took 1 MX3 GS rims off you old Escort GT (originaly red but sprayed flat black right?) because I needed one lol. I will take all your KL parts What's your phone number so we can meet up :)

defiler
01-25-2011, 02:54 AM
Hahahaha I took 1 MX3 GS rims off you old Escort GT (originaly red but sprayed flat black right?) because I needed one lol. I will take all your KL parts What's your phone number so we can meet up :)

Ha, yeah that was the one. How'd you manage to get the rim off without the key for the lugs? I was curious why there was only 1 rim off too. lol

mx-3_4evr
01-25-2011, 11:06 AM
Ha, yeah that was the one. How'd you manage to get the rim off without the key for the lugs? I was curious why there was only 1 rim off too. lol

I have junk yard skillz!!!!!! :P

defiler
01-25-2011, 01:43 PM
Soooo vice grips? lol


If i would have known you needed a wheel, I would have thrown the spare on there and given it to you before I brought it into the junkyard.

The Pile
02-01-2011, 12:50 AM
Such a good deal!!!! is this still available? this might be worth teh drive

mx-3_4evr
02-01-2011, 10:17 AM
Such a good deal!!!! is this still available? this might be worth teh drive

I'm picking it up today :P

defiler
02-01-2011, 01:53 PM
I'm picking it up today :P

What he said.

defiler
02-02-2011, 02:07 AM
I forgot to mention too, at that same u-pull, my old roomates 2g Probe was there, and it still had the 5-way adjustable Illuminas with H&R springs on it. Still worked great before the car was impounded too.

Turpro
02-02-2011, 05:30 AM
next time post a fs thread the right way