Help with a KLZE in a 626

[aleksey17]

Hey everyone I am new to Mazda scene. I just got myself a 94 Mazda 626 V6 manual and swapped in a jdm klze curved neck. The problem I am having are the vacuum hoses I have no idea which one goes where. One vacuum hose comes from the cruise control and one is from some canister next to it, and also one is from the EGR. And they all look like they are supposed to go to these sensors with little nibbles for vacuum hoses located behind the throttle body. I have a picture but can't upload it for some reason. Please if anyone can help me out with some pictures of your set up.

Thanks

[Mazda_Powered]

Nice pick, I have a 93 626 V6

I'll be able to get you some vac diagrams off my other comp in a few hours, asides from that your best bet is to try mx6.com since they're specific to the GD/GE Mazda chassis.

[KaleoXtreme]

If you can figure out how to upload the pic. I can try to take one from my 02 millenia curved neck KL. Although the vac lines run under the intake manifold and are hard to trace. But it's worth a shot!

[MazdaNoob]

thought jdm klze didnt have egr..... so if your's does ya might have some checking to do

[monoxidechild]

if you have a EGR, you dont have a curved neck ZE. you have an american spec millenia motor. lol. curved neck ZE's have no EGR, and a factory block off plate in place.