Someone can tell me . What's year the Escort's Piston can use to the BP Engine? I want to buy BP engine and enlarge the cylinder diameter to 2.0L. But I don't know which piston i can use.
Announcement
Collapse
No announcement yet.
Abort Escort's Piston..
Collapse
X
-
you can't.
the bore spacing is too wide to goto 2L without x-raying the block. ~1 in 4 will be able to be punched out to 2L."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
-
if you START with a 1.8, it's not enough"Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
then his rod ratio went to crap...because you'll need shorter rods and a stroker crank.
or.....he's lying."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
Originally posted by JesseSaysthen his rod ratio went to crap...because you'll need shorter rods and a stroker crank.
or.....he's lying.
ok first of all if you bore the motor you can get a displacement of a 2.0cc. second what you said is totally wrong. you can retain the same rod ratio and just change the pin hieght. and last im not a liar.Fastest BP Powered Escort
Most WHP:545.6
Most TQ:411.4
Best ET:11.2 (Blew the head gasket at the 1000 foot mark)
Best MPH:123
Comment
-
Originally posted by mikachanSomeone can tell me . What's year the Escort's Piston can use to the BP Engine? I want to buy BP engine and enlarge the cylinder diameter to 2.0L. But I don't know which piston i can use.
wiseco makes off the shelf pistons for the bp motor. the go up to .80 over. wich makes the displacement about 1.95.Fastest BP Powered Escort
Most WHP:545.6
Most TQ:411.4
Best ET:11.2 (Blew the head gasket at the 1000 foot mark)
Best MPH:123
Comment
-
Originally posted by 545HpGtok first of all if you bore the motor you can get a displacement of a 2.0cc. second what you said is totally wrong. you can retain the same rod ratio and just change the pin hieght. and last im not a liar.
And pin height is only going to affect compression. Why are you changing pin height? And moreover, what does it have to do with changing rod ratio? Pin height doesn't change rod ratio."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
toda has never made the power that i have so the fact that they dont even go that big on the bore is besides the point.
i never said that pin height changes rod ratio. if you where to change the pin height then you can stay with the same lenght of rod. and there for just change the crank.Fastest BP Powered Escort
Most WHP:545.6
Most TQ:411.4
Best ET:11.2 (Blew the head gasket at the 1000 foot mark)
Best MPH:123
Comment
-
Originally posted by 545HpGttoda has never made the power that i have so the fact that they dont even go that big on the bore is besides the point.
i never said that pin height changes rod ratio. if you where to change the pin height then you can stay with the same lenght of rod. and there for just change the crank.
TODA doesn't make as much power as you because they build NA race motors. They don't build big turbo drag motors. You really are ignorant.
oh, now we'll just change the crank...because that's cheap..."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
Originally posted by JesseSaysTODA doesn't make as much power as you because they build NA race motors. They don't build big turbo drag motors. You really are ignorant.
oh, now we'll just change the crank...because that's cheap...
i know that toda doesnt build turbo motors, you were the one that brought them up. do with the crank what you want but ill stay with the 1.8 crank and just increase the bore size. and being ignorant is saying that you cant make a 1.8 bp into a 2.0Last edited by 545HpGt; 03-07-2004, 01:10 PM.Fastest BP Powered Escort
Most WHP:545.6
Most TQ:411.4
Best ET:11.2 (Blew the head gasket at the 1000 foot mark)
Best MPH:123
Comment
-
Originally posted by bp 1.8you both are full of crap.
change the pin hight effects the rod ratio.
rod ratio = rod length/stroke.
what part of pin height effects either?"Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
Comment