Announcement

Collapse
No announcement yet.

Engine Clearances for B6T Main Rod Etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Engine Clearances for B6T Main Rod Etc

    Does anyone or has anyone assembled a B6T personally ?

    My block, crank and head are at the machine shop currently and should be back in a week or so. My block is getting Honed and hot tanked, my crank is being mic'd and checked. And my head is getting a valve job.

    I'm planning on running King bearings and sealed power rings.

    I was planning on assembling the motor myself and wanted to know if anyone had a spec sheet of some sort about clearances.
    _Shocker_ 88 Festiva B6T

    #2
    Go to Fordlaser.com and download the factory service manual or log on to techcapri.com and check out the service manual loaded there.

    Clay

    Comment


      #3
      Thanks Clay^^ that helped a lot !
      _Shocker_ 88 Festiva B6T

      Comment


        #4
        Yep, FSM.

        Comment


          #5
          Machine shop called this morning and said this crank is in excellent condition and to order standard main and rod bearings sweet !
          _Shocker_ 88 Festiva B6T

          Comment


            #6
            Originally posted by _Shocker_ View Post
            Machine shop called this morning and said this crank is in excellent condition and to order standard main and rod bearings sweet !
            Typical b6t,F%#kin' bullet proof bottom ends!

            Comment

            Working...
            X