Thought it was about time I made a project topic up on this site. Well basically, I brought myself a 1992 Mazda Familia GT-R back in November of last year. The only modifactions to the car was an after market blow off valve, rims and some Dobi lowering springs. So it was in pretty original condition. Since then I've fixed/replaced a few things being:
- Broken transfer case bearing, gearbox bearings and 2nd gear&pinion shaft
- Four brand new tyres
- New radiator and hoses
- Oil service
Recently just this week, I've also finally had a full 2.5" exhaust system all the way through, along with a custom steam tube exhaust manifold, Tial 38mm external wastegate, K&N induction and got myself a boost tap hooked up for some 16psi fun :D. Here's some pictures [sorry about the **** quality of the manifold, I don't have a camera anymore as the previous pictures were taken some time ago]
From the old broken radiator, tried covering the cracks up but didn't work lol:
- Broken transfer case bearing, gearbox bearings and 2nd gear&pinion shaft
- Four brand new tyres
- New radiator and hoses
- Oil service
Recently just this week, I've also finally had a full 2.5" exhaust system all the way through, along with a custom steam tube exhaust manifold, Tial 38mm external wastegate, K&N induction and got myself a boost tap hooked up for some 16psi fun :D. Here's some pictures [sorry about the **** quality of the manifold, I don't have a camera anymore as the previous pictures were taken some time ago]
From the old broken radiator, tried covering the cracks up but didn't work lol:
Comment