B6T Timing, Pic help

[_Shocker_]

Ive read that you need to use the back part of the timing cover to properly do the timing for the B6T. The manual makes no reference to this though?

I took a picture and was wondering if someone could help me distinguish where the lines are on this cover that line up with the gears ?

The manual just said to throw the I and E at 12 o'clock..any help would be appreciated.

[audi5000]

[_Shocker_]

Ok, so when The machine shop took the cam gears off to go through the head they put them back on the same way is what they said (they go on 1 way right ? Keyway?)

And this is what I got, I put them at 12 o'clock actually 1 tooth before 12. So I should just cut the cover and slide it behind the gears and see if my
Marks line up?

[_Shocker_]

It looks like I need to be a tooth after 12 on the Intake and a tooth before 12 on the exhaust

[audi5000]

No, straight 12'o'clock should do it.
hard to tell without the backing plate behind the cam gears.

[DuRWooD]

Just took my timing belt off to remove the head, and it's not 12 o'clock. Intake is about half a tooth after 12 o'clock, and the exhaust is about half a tooth before 12.

[_Shocker_]

Good to know thanks brotha!