I need to make some sort of covers for the vents in my evo hood. Now they need to be easily to remove and install. I would just put something permanent under there but I think the hood is going to do alot of good when the turbo goes in. I figured I would make some covers out of plexiglass, but I am kind of lost as to how to make the grilles. Need some suggestions. Right now I am rocking the ghetto wrigged cling wrap held on by duct tape......had to do something quick tonight since it is going to rain tomorrow.
Announcement
Collapse
No announcement yet.
Help With CF Hood Vents
Collapse
X
-
They have them listed on their website now as something you can buy for your hood. Part number 202007.http://wingswest.com/products_detail.asp?page=1&id=1925[
Comment
-
I'm not quite sure what you're asking... you just want something to put under the vents so the rain won't get in? Why do you need to make grilles yourself? Wouldn't you just cover the holes underneath the grilles that are already there? It seems like you could just cut the plexiglass to the right size and screw it in, and then take it out again when you need the air flow.
Comment
-
hey guys are you forgetting something... how will he attach it... with screws? that means drilling holes...Greg, do you feel like drilling a hole through you CF hood?.... what I would do is take some fiberglass resin and fiberglass little sleeves onto the bottom of the hood that way your plexiglass can slide in and out. then fiber glass in a nut at one end of hte plexi and hten screw in the bolt to hold it in place.... dun know how to explain it better but i know what im tryin to say
Comment
-
lol, snippety
rule #1 dont get snippetyAccording to my Anger Management Counselor, after 26 weeks of anger management class, I should be an expert when it comes to Anger Management...tell that to the guy who threw a starburst at my car in rush hour traffic...haha
Todays thought of the day:
Rice is great if your really hungry and want to eat 2000 of something.
Mitch Hedberg
Comment
-
Originally posted by asylum24hey guys are you forgetting something... how will he attach it... with screws? that means drilling holes...Greg, do you feel like drilling a hole through you CF hood?.... what I would do is take some fiberglass resin and fiberglass little sleeves onto the bottom of the hood that way your plexiglass can slide in and out. then fiber glass in a nut at one end of hte plexi and hten screw in the bolt to hold it in place.... dun know how to explain it better but i know what im tryin to say
Comment
-
i got an idea.....window tracks. not even gonna attempt to explain this but build on this idea.According to my Anger Management Counselor, after 26 weeks of anger management class, I should be an expert when it comes to Anger Management...tell that to the guy who threw a starburst at my car in rush hour traffic...haha
Todays thought of the day:
Rice is great if your really hungry and want to eat 2000 of something.
Mitch Hedberg
Comment
Comment