Announcement

Collapse
No announcement yet.

FS/GI: custom stock door panel speaker pods inserts

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS/GI: custom stock door panel speaker pods inserts

    first off this is not a group buy. first come first serve. no waiting until 9 other members contribute.

    i have had two people recently contact me about speaker pods for the mx3. so i figured i don't have any bookings right now i would build a couple different set-ups. i have three different designs in fabrication right now. all designs are based on a 6.5 driver. hole cut out is 5.5" able to use a 7.5" outside diameter grill.

    1. power windows able to house components. these also would be component specific. far to many tweeter size variations.

    2. power windows with coaxials or just a component woofer. these may or may not work in non-power window applications dependent on the grill used (if a grill is desired).

    3. non-power windows with components - these will extend to the bottom corner of the door panel to allow proper fitment. this will take a lot more design time. may not have pictures up for sometime. these also would be component specific. far to many woofer magnet depths and sizes along with tweeter size variations.

    all of these will be direct drop in pods. i would recommend noise deadening the back side of the door panel after installation. so i guess this would be "modification". zero destructive panel modification is really needed.
    the only application that modification would have to be considered is option #3. if an enlarged opening is desired for the woofer to breath more efficiently.

    covering materials. can be speaker box carpet, vinyl (have these in stock) or anything you may want (i have an upolstry guy). i happen to have some silver CF patterned vinyl right now so i may cover one set in that. some times vinyl takes a little stitch work (hard angles) that would be an added cost i need to get an estimate on per design. i will list an adder on here of what it would be in the following weeks as i complete the pods.

    all prices below are priced with speaker box fabric. all options there will be an adder for vynil. the angles of these pods will not allow my to contour the vinyl. option #1 will have a stitching below the tweeter towards the corner of the door. option #2 will be a stitching most likely in the step up just above the speaker. option #3 is yet to be determined.

    pricing goes as so:
    option #1 = $105 shipped in the 48 states. add $10 for canada
    option #2 = $95 shipped in the 48 states. add $10 for canada
    option #3 = $125 shipped in the 48 states. add $10 for canada

    all packages will be insured to the value of the pods plus the value of whatever speaker is with it. if a speaker is with it i will insure up to the replacement cost of the pair.

    please see my FEOA thread for pictures of my other work or my Facebook

    example of option #1



    example of option #2
    in box fabric

    in vinyl wrap - this is not a finished pod just for reference.


    example of option #3
    to come possibly the weekend of 12-10-11

    MX-3 Pods Album

    i will edit this for content and photo's in the following weeks to tune up the details. prices are subject to adjustment at anytime. if you agree to buy with the cost listed it will not change in that transaction. only future buyers unless i lower the sell cost then it will change to the new lower cost.


    NEUMAN
    Last edited by neuspeedescort; 12-08-2011, 12:12 AM.
Working...
X