Announcement

Collapse
No announcement yet.

gt/gtx diffence

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    gt/gtx diffence

    I got a few front knuckles kickin around,I have no idea which may be gt or gtx knuckles,any pointers I can look for?Thanks.

    #2
    ok... I will see if I can find the pics from the old Yahoo Groups archive.... but...

    The std 1.6l SOHC knuckle has the steering arm that sits the highest and is basically flat, also the brake caliper ears are shorter by nearly 1/2" shorter. So if you line up the knuckles, if the caliper mounts are short... its a SOHC knuckle. the GT/GTX caliper location is the same.

    The GTX has the most pronounced angle of the steering arm. I am told in the past that the GT knuckle is a nice swap on the GTX's... or is that the other way?

    there was a significant discussion on the Yahoo group about it.

    Rob

    Comment


      #3
      Thanks Rob
      Yeah I searched the yahoo group,lots of talk about the pros and cons of using different knuckles.I'm goin take a look at steering arm angles and try and figure them out.

      Comment


        #4
        GTX on the left and GT on the right.

        Comment


          #5
          Thats great!Thanks,Clay.

          Comment

          Working...
          X