Anyone install or write about they're install of the group buy yet?
Announcement
Collapse
No announcement yet.
installed ur bushings yet?
Collapse
X
-
I put them in my spare set of arms but until I finish putting my escort together or the weather gets better I can't have the gtx downIan Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
-
Hey,question for you guys.I was cleaning up some lateral links and noticed I have 8 bushings for the rear bushing kit 4 for the lateral links I'm assuming,and what the hell are the other 4 for? Ithought they were for the trailing arms originally but they are nowhere near the correct size.What gives?
Comment
-
Originally posted by nickz View PostHey,question for you guys.I was cleaning up some lateral links and noticed I have 8 bushings for the rear bushing kit 4 for the lateral links I'm assuming,and what the hell are the other 4 for? Ithought they were for the trailing arms originally but they are nowhere near the correct size.What gives?Ian Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
Comment
-
No problem, I wouldn't have know except I already did some on my egt. Good luck!Ian Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
Comment
-
Does anyone know if you can still get the ttl bolts for the spindle side? and where?Ian Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
Comment
-
Originally posted by nickz View PostIf your talking about the long buggers that like to weld them selves to the spindle, I scored mine from mazda.been a while now mind ya.Ian Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
Comment
-
they are specific to the BF and readily available from Mazda. I cannot answer base/GT (same) vs GTX. I know the GTX lateral arms are different.
I bought the entire rear subframe hardware set, from mount bolts, to every bolt, washer, nut, cup and cover. Dang close to $200 later.. yep they are available... ouch...
I need to call Tony or Clint at Turn In and see if they can get more bushings... I've got another subframe sitting in the garage I need to rebuild.
Rob
Comment
-
Originally posted by nickz View PostHave you guys who bought the rear lateral bushings for the gtx resolved there problems yet?Figure away around this bs?
Comment
Comment