If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
good morning friends, I'm new to the forum, and I need information on the IHI turbo VJ 20, measures characteristics, and the maximum pressure which provides, thank you very much to all
Thanks for your answers, my idea was to make it work at 20 psi, in a BPT 1.8 16v engine, 4 ignition coil (independent) and 57 lbs injectors, quite large intercooler (24 x 12 x 3) all controlled by MegaSquirt1 V3.0 the engine is completely stock!
the gtx turbo (VJ20) compressor wheel is ?????
I recommend?
sorry for my English is not the best.
Thanks for your answers, my idea was to make it work at 20 psi, in a BPT 1.8 16v engine, 4 ignition coil (independent) and 57 lbs injectors, quite large intercooler (24 x 12 x 3) all controlled by MegaSquirt1 V3.0 the engine is completely stock!
the gtx turbo (VJ20) compressor wheel is ?????
I recommend?
sorry for my English is not the best.
again best regards .. !
that intercooler and especially those injectors are way overkill for a baby turbo like that.
if you're going that far, use a 50 trim or HX/HY35...
sigpic
03 Accord DX: K24/5MT, peasant-spec old man's car
92 240SX: KA/T25, nerd mobile
Comment