Announcement

Collapse
No announcement yet.

Turbo VJ-20 Specs !

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Turbo VJ-20 Specs !

    good morning friends, I'm new to the forum, and I need information on the IHI turbo VJ 20, measures characteristics, and the maximum pressure which provides, thank you very much to all


    regards

    #2
    Anything more than 15 psi is just hot air. Not much lag for a journal bearing turbo though.
    '90 AWD Protege, full GTR drivetrain swap, ~320 whp daily driver, RIP, and
    '90 AWD Protege, yet another GTR swap, Open class rallycar with a Toyota GT4 gearbox swap, thus crossing the line between hobby and mental illness. And a Brabus E55 K8, removing all doubt.
    http://www.wihandyman.com/forum/vbpi...?do=view&g=110
    http://www.cardomain.com/ride/2599486

    Comment


      #3
      boost is instant, tapers off around 6500rpm, more than 15-16 psi is pointless
      sigpic

      03 Accord DX: K24/5MT, peasant-spec old man's car
      92 240SX: KA/T25, nerd mobile

      Comment


        #4
        Thanks for your answers, my idea was to make it work at 20 psi, in a BPT 1.8 16v engine, 4 ignition coil (independent) and 57 lbs injectors, quite large intercooler (24 x 12 x 3) all controlled by MegaSquirt1 V3.0 the engine is completely stock!

        the gtx turbo (VJ20) compressor wheel is ?????

        I recommend?
        sorry for my English is not the best.

        again best regards .. !
        Last edited by Natech; 06-02-2012, 08:49 AM.

        Comment


          #5
          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

          1992- project FE3..... 313 WHP @ 9.3psi




          I pet my dash when I get into the car..."good car"
          he actually has a mazda tree, parts grow on it

          Comment


            #6
            Thanks for the link

            Comment


              #7
              Originally posted by Natech View Post
              Thanks for your answers, my idea was to make it work at 20 psi, in a BPT 1.8 16v engine, 4 ignition coil (independent) and 57 lbs injectors, quite large intercooler (24 x 12 x 3) all controlled by MegaSquirt1 V3.0 the engine is completely stock!

              the gtx turbo (VJ20) compressor wheel is ?????

              I recommend?
              sorry for my English is not the best.

              again best regards .. !
              that intercooler and especially those injectors are way overkill for a baby turbo like that.

              if you're going that far, use a 50 trim or HX/HY35...
              sigpic

              03 Accord DX: K24/5MT, peasant-spec old man's car
              92 240SX: KA/T25, nerd mobile

              Comment


                #8
                also will use 100 hp nitrous !

                Comment

                Working...
                X