Hi guys
I am almost done fixing my car and I have left with a few spare parts
I want to see if there is any interest to sell them.
All the parts are located in Athens Greece and they will be available end of August when I go there (thats why I dont have pictures yet).
Happy to post but I would be even more happier if you organize a courier to pick them up :-)
PS I know that for the big items like the bonnet and the bumper, shipping will be a bit expensive via air but the other parts will be ok.
Exhaust header with turbo from mazda 323 GTX 1.8L
Piping for front mount intercooler for mazda 323 1.8L GTX
Fuel pump from mazda 323 1.8L SOHC
Stock used pistons and rods from mazda 323 1.8L turbo GTX
Aluminum radiator (double the thickness) for mazda 323 BG (unsure if it will fit in the F models)
Bonnet for mazda 323 model (the older one model 1991) with a Celica GT4 vent
Clutch, pressure plate and flywheel (the flywheel is BP05 but I had the whole setup on my 323 4WD GTX 1.8L so it might fit on a FWD?)
Used catback exhaust 54mm
Aftermarket fuel pressure regulator
Front bumper from 323 GT/GTX
1.8L GTX injectors
1.8L GTX stock camgears and camshafts
One extra muffler (round shape)
2 ECU harnesses for mazda 323 GTX 1.8L right hand drive
Mazda 323 1.8L 4WD SOHC rear diff
Mazda 323 1.8L 4WD SOHC sedan front and rear sway bars
Thanks
I am almost done fixing my car and I have left with a few spare parts
I want to see if there is any interest to sell them.
All the parts are located in Athens Greece and they will be available end of August when I go there (thats why I dont have pictures yet).
Happy to post but I would be even more happier if you organize a courier to pick them up :-)
PS I know that for the big items like the bonnet and the bumper, shipping will be a bit expensive via air but the other parts will be ok.
Exhaust header with turbo from mazda 323 GTX 1.8L
Piping for front mount intercooler for mazda 323 1.8L GTX
Fuel pump from mazda 323 1.8L SOHC
Stock used pistons and rods from mazda 323 1.8L turbo GTX
Aluminum radiator (double the thickness) for mazda 323 BG (unsure if it will fit in the F models)
Bonnet for mazda 323 model (the older one model 1991) with a Celica GT4 vent
Clutch, pressure plate and flywheel (the flywheel is BP05 but I had the whole setup on my 323 4WD GTX 1.8L so it might fit on a FWD?)
Used catback exhaust 54mm
Aftermarket fuel pressure regulator
Front bumper from 323 GT/GTX
1.8L GTX injectors
1.8L GTX stock camgears and camshafts
One extra muffler (round shape)
2 ECU harnesses for mazda 323 GTX 1.8L right hand drive
Mazda 323 1.8L 4WD SOHC rear diff
Mazda 323 1.8L 4WD SOHC sedan front and rear sway bars
Thanks
Comment