Is there such a thing as a 1994 Mazda Protege LX Turbo Kit?
Announcement
Collapse
No announcement yet.
First Gen Turbo Kit
Collapse
X
-
No, there's not. If you want to turbo your car, you'll need to setup your own turbo system.
-Moved to forced induction!-------------------------
'91 LX
'03 Mazdaspeed Protege #235
-------------------------
Originally posted by pigeonwell if you're a fan of inaccuracy and uncertainty.... then by all means, go set your timing by feel and sound
while you're out there, you might as well adjust your air/fuel ratio by smell... and your tire pressure by ride height
-
the first gen has a sister engine in the 323 GTX which is a turbo engine. do a search.When you turn your car on... does it return the favor?
Originally posted by goldstarYes, still have it. It was my attempt to immortalize you in verse.
A Protege driver named Brock
Once said 7 seconds he'd clock.
So his engine he goosed
With much too much boost,
And drove a rod through his block.
Comment
-
well its made by mazda all it is, is an lx motor (dohc) with a turbo, side mount intercooler and some better internals and i think the cams are different. its an almost direct bolt in motor and is capaple of big hp. u can find the hole front clip with this motor,ecu, all accesories on ebay even for like 1500 bucks plus shipping and then corksport has them (or can get u one) and is wut most ppl on this board do to their first gen pro if they want turbo.i is dumb
Comment
-
Originally posted by siren001Who makes that? What company, where can you get info on it. and would that work on a 1994 Mazda Protege Lx?
Comment
-
I still the The T28 is a bit small for the BP.. A moderately sized T3 will work wonders and be very cost effective. The Disco Potato that everyone is after is a decent turbo for 1.8-2.2L motors but is pretty pricey. Don't even try to use the T25 on the MSP, its worthless Go with a .42/.48 T3 or a .60/.63 if you want some top end. Both will turn 350whp without a sweat (12-16psi). The bigger T3/To4e combo will be a bit on the "heavy" lag side, even though it will spool a little later than a normal T3, its a bit overkill for anyone looking to stay under 400whp.-Braden
'05 WRX
GTX Groupbuy is Closed! However you can still pick up a GTX motor for only $925!!! PM me for order details!
Comment
-
Originally posted by charlesHeh, what about one of those variable vane turbos.... how much would that run?
I think it is, since you could run a bigger turbo and not worry quite so much about excessive lag.Ryan The middle child is always ignored
BP powered 97LX Touring Edition
Vibrant strut tower brace, KVR front brake pads, Tungsram Megalicht H4 headlight bulbs, Phillips Halogen H3 foglight bulbs.... 91 GT rims w/ 195 60 14 Yokohomo Mirada GTX sport
Comment
Comment