I'm pretty sure both front wheel bearings just kicked the bucket at the same time which seems kind of odd to me.
On the driver side it sounds like a Styrofoam squeak when stoping next to cars goes away when I turn left louder to the right. No play in the wheel but when turning it its hard in when it get to a certain point as if the rotor is bent. I can only hear it when it can echo off something like trees, buildings, or cars
The passenger front sounds like I have a super swamper on it, rotated tires and it didn't help at all stays the same turning left and right. No play in the tire but it spins freely
There is no vibration, it does pull to the right a bit though
I know wheel bearing failures are common on these, I'm wondering how hard it is to do them and what should be replaced with them besides rotors.
On the driver side it sounds like a Styrofoam squeak when stoping next to cars goes away when I turn left louder to the right. No play in the wheel but when turning it its hard in when it get to a certain point as if the rotor is bent. I can only hear it when it can echo off something like trees, buildings, or cars
The passenger front sounds like I have a super swamper on it, rotated tires and it didn't help at all stays the same turning left and right. No play in the tire but it spins freely
There is no vibration, it does pull to the right a bit though
I know wheel bearing failures are common on these, I'm wondering how hard it is to do them and what should be replaced with them besides rotors.
Comment