whats the redline on this car
Announcement
Collapse
No announcement yet.
redline???
Collapse
X
-
7200 IIRC... your tach is off. Fuel cut by the ECU is 7200"Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
Damn.
Is the tach only inaccurate in the higher rev range like a speedo is at higher speeds??
How can I check for sure how accurate it is, do I need a Timing light with RPM readout or a scanner with the same??Ryan The middle child is always ignored
BP powered 97LX Touring Edition
Vibrant strut tower brace, KVR front brake pads, Tungsram Megalicht H4 headlight bulbs, Phillips Halogen H3 foglight bulbs.... 91 GT rims w/ 195 60 14 Yokohomo Mirada GTX sport
Comment
-
Originally posted by midnightblue97Damn.
Is the tach only inaccurate in the higher rev range like a speedo is at higher speeds??
How can I check for sure how accurate it is, do I need a Timing light with RPM readout or a scanner with the same??
that'd be an easy way...
anything that takes it's signal directly off the ignition system would be accurate."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
Originally posted by TwinCam16i know a 1.8 that goes to 7500
but this is a JDM protege and it is the only onei know so i was able to compare with others. buti have a 1.5 and i never ever ever get pass 6500Almost there
jdm tails... check
jdm bumper... check
ms lip... check
ms grill... check
ms sideskirts... check
ms rear skirts... check
ms spoiler... check
ms struts... check
Still trying for a bp swap..:
Fidanzda 8lb flywheel, ACT HD00, UR Crank Pulley, UR Adj. Cam-Gears, Exh-Intake CamShaft Swap, MS Engine Mounts, Custom CAI, PaceSetter Header, 2.25" in/out-let Magnaflow Cat, 2.25" Mandrel-Bent Exhaust.
Comment
Comment