I need to know what do I need to install the MX3/EGT/Protege LX front rotors and calipers.
I noticed that the calipers 13V22 found on the Protege DX have the same casting as the MX3/EGT/Protege LX which are 14V22. I will be using the 14V22 for my swap since it has a larger piston.
I know I need to replace the steering knuckle(where the caliper is held by) in order for the caliper to clear the 10.12"rotors (MX3/EGT/Protege LX). My big question is which steering knuckle do I need to use without replacing anything else on the swap. I called Mazda and they told me that the Protege LX and MX3 steering knuckle have different part numbers, what's the difference?
Has anyone done this?
Thanks.
I noticed that the calipers 13V22 found on the Protege DX have the same casting as the MX3/EGT/Protege LX which are 14V22. I will be using the 14V22 for my swap since it has a larger piston.
I know I need to replace the steering knuckle(where the caliper is held by) in order for the caliper to clear the 10.12"rotors (MX3/EGT/Protege LX). My big question is which steering knuckle do I need to use without replacing anything else on the swap. I called Mazda and they told me that the Protege LX and MX3 steering knuckle have different part numbers, what's the difference?
Has anyone done this?
Thanks.
Comment