Announcement

Collapse
No announcement yet.

Do i have an engine swap to the FS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Do i have an engine swap to the FS

    hey everyone whats up... some of you might remember me from the old forums...well i'm here now....

    i just wanted to ask tho, my enigne blew about a year ago (May, 2003)

    and we got it replaced under warranty...

    well i knwo liek everything about the differences between the FP, and FS engines

    I have a '99 Protege LX touring edition (came with the 1.8L FP-DE engine)

    well long story short i was looking itno the engine bay and well

    right under the head, around where cylinder 3 is ... it is stamped on the block as "FS9"

    does this mean i have the FS 2.0L engine.....
    did the mazda dealer that serviced my car, did they maybe drop in the 2.0L engine, what do you guys think....

    well here are the details form my invoice that mazda gave me

    quantity.....| description
    ---------------------------------------------
    ..................| Check for oil leaks
    ..................| Connecting rod went through engine block
    .......74.......| Replaced Engine Assem (B0103XRXXB 16)
    ..................| Lower rad hose leaking coolant
    ........8........| Replaced lower rad hose (E0302XRXXB 16)
    ..................| Catalytic Converter Damaged
    ........9........| Replaced catalytic converter (F0702ARXXB 16)
    **PARTS**
    ........1........| MFP49-02-300C ENGINE, PAR (ADAX)
    ........1........| MZM02-20-500A CONVERTER, (ADAXE1A)
    ........1........| MZM01-20-520 GASKET, CAT (ADAXBIN)
    ........1........| MKL19-40-450 GASKET, CON (ADAXBIN)
    ........1........| MFS01-13-460A GASKET, EX. (ADAX)
    ........1........| MFSJ2-13-111A GASKET, IN. (ADAXEND D)
    ........1........| MFS02-15-169 GASKET, WAT (ADAX)
    ........1........| MFS02-15-116 GASKET, WAT (ADAXB2F)
    ........1........| MFS02-15-173 GASKET, THE (ADAX)
    ........3........| M5555-CL-001R ANTI-FREEZ (ADAXWARR)
    ........4........| M5555-EG-001R ENGINE OIL (ADAXWARR)
    ........1........| MB6Y1-14-302A-CA OIL FILTER (ADAXFAST)
    ........1........| M9956-41-400 GASKET (ADAXBIN)
    ........1........| MB25D-39-050C RUBBER NO. (VTAXD1C)
    ........2........| MGJ21-33-042B NUT (VTAXC2A)
    ........1........| MFP47-15-185C HOSE, WATER (VTAXEND D)
    ........1........| MZ520-40-305 GASKET (VTAXBOX 2)

    that is all of it, now what do you guys think.... u think they put the FS in, instead of the FP

    i ahve noticed more torque down low, than before, and i also have noticed that the power drops off like just before 6000RPM (like maybe 5500RPM) and back before when i had the FP the power didn't drop off, but it did not have the low end torque...

    I'm also concearned about the ECU... will the ECU from the 1.8s run the 2.0 properly.... i knwo that the 1.8s had a speed governor and the 2.0s didn't

    what is the rev limiter set at on the 2.0s???

    I also knwo that the ranny in the FP wasn't as strong as the tranny int eh FS, and i dunt see any work been done to my tranny, so i'm wondering hwo bad of a concearn that would be..... well i have been driving it for over a year, and without any problems so far....

    mainly i just wanna knwo if the engine has been swapped...

    sorry for the long thread tho :p i hope some of you guys can help....
    Chas Rooprai
    Yeah me only 18
    My Car Domain Page With Pics And Info

    1999 Protege LX -•- Touring Edition -•- 5 Spd -•- 1.8L FP-DE -•- 122HP @ 6000RPM -•- 120LBS/FT @ 4000RPM -•- New FP-DE engine - stock May '03 -•- New aftermarket clutch december '03


    #2
    That must have cost a ton of money.
    Clint/1999 "Sport20"

    Comment


      #3
      MFP49-look at the part number you have.
      and its a new engine it should run better.

      *edit* sorry this came up on the bottom for related post. I responded before looking at the 4 year old date. my bad.*
      Beater=/= Sleeper

      Originally posted by kozzman555
      kitty, you are a hilarious woman
      Originally posted by HopelessCow
      there is one thing i dunno what is that call,a thing look like a gun, u press the button and stick to the metal and it makes firework, do i need that thing?and what s the philip head screw drivers?
      Using Linux for anything serious besides server or software dev is like using a tin can and a string for telecommunications.

      Comment


        #4
        Originally posted by 98b/w pro
        MFP49-look at the part number you have.
        and its a new engine it should run better.

        *edit* sorry this came up on the bottom for related post. I responded before looking at the 4 year old date. my bad.*

        c+p>c<c+d1>c+p<m+d2>m<m+f>f<c+p>m<m+f>f<f+s1>c+p<c +s2>c<c+p>

        2002 Mazda Protégé 5 , 5-speed , poly engine mounts , 4 to 1 header , JIC-Magic semi titanium cat back , custom CAI , Tokiko hp struts , Vogtland springs , Mazdaspeed sway-bar kit , Megan racing TTL's , Megan Racing trailing arms , pedders control arm bushings , corksport clutch line and shifter bushings , Tiger Tuning rear panel with V brace , Black sedan headlights with 6000k H.I.D.'s , M3 mirrors , Audio by Alpine , Kicker and just getting started.

        Comment

        Working...
        X