what octane gas to use for my 1.5L engine my friend give me a litre of 110 octane racing gas will this do anything if I use it.
Announcement
Collapse
No announcement yet.
what octane gas to use
Collapse
X
-
yeah just use good old 87, its worthless to run any better and waist money for nothing......HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
-
110 octane will certainly do serious damage to the engine. DO NOT use it. I would not even use octance boosters you can buy off of the shelf in Autozone or anywhere else. Our engine was designed for 87, nothing else. 93 or 89 is good to use once in a great while, but certainly not 110."Probable impossibilities are to be preferred to improbable possibilities."
Comment
-
I don't see how 110 could damage the engine. I know that the higher the ocatane the better your engine is to be less prone to detonate.
This is if you wanted to make use of the 110 octane though, you would have to advance your timing by like 8 degrees or so.
Otherwise it will just burn like regular gas.
But I tend to use 87 in the protege and the 323.
If the price of gas goes down, then I will advance the timing to 12 or 14 degree's and run special (89) or super (92) when I go to the track.
Comment
-
I Run 93.....HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
yeah, I overheard this guy talkin about how he messed up his car, wasn't actually part of the convo. But he put in a LOT of race fuel (didn't specify) without cutting it, which would lead me to believe he was running the tank pretty low. I think it was supposed to be 2 parts street gas to 1 part race (whatever he was putting in).
Comment
-
well serves him for being a dumb ass......HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
Comment