Announcement

Collapse
No announcement yet.

fiberglassing quesitons

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fiberglassing quesitons

    ok im wanting to build a speaker box, but not sure what to use. Im going to make it out of fiberglass but should i use a mat or weave. Also im thinking like 4 layers then a sound damping material then a few more layers of fiberglass. What do you guys think what would be the best way to go about this. Also since im going to have to do like 3 seperate pieces in my trunk to get all to fit whats the best way to stop rattle. I was thinking 3 boxes tied into as one the 2 side boxes and then a middle one that would go in last between the other 2 reaching in through the speaker holes and putting fiberglass where the joint of the boxes meet. then covering the lines with a aluminum plate on all of them like im going to make my floormats out of. Any ideas that would osund better than this or even tweak it let me know i'm driving a 2002 mazda protege es with hopefully 2 12's in the back.

    #2
    goto the audio section, there is a sticky at the top on boxbuilding and fiberglassing.
    '02 classic red p5
    currently enrolled in AA.

    Comment

    Working...
    X