i didn't get a half cut or gtx IC/IC pipes/afm or boost control solnoid,ect. I only got the motor and ecu/ with the wiring harness, so i made my own IC pipes and mounted a T-Bird Super coupe IC in the front along with a 1st Gen DSM BOV .
so heres my ?'s
i need help on were to run my vacuum hoses to.
i have 2 vacuum nipples on the top of my intake manifold.
have 1 line that runs off the FPR and 1 more that t's into that vacuum line, and 1 that runs from the FRP to the solinoid Valve (pressure regulator) that one is hooked up right.
also were do i run my vacuum line from my wastegate actuator to.
what vacuum line runs to my BOV.
and what would be the best place to T into for my boost gauge.
thanks ryan
any help would be apprciated
so heres my ?'s
i need help on were to run my vacuum hoses to.
i have 2 vacuum nipples on the top of my intake manifold.
have 1 line that runs off the FPR and 1 more that t's into that vacuum line, and 1 that runs from the FRP to the solinoid Valve (pressure regulator) that one is hooked up right.
also were do i run my vacuum line from my wastegate actuator to.
what vacuum line runs to my BOV.
and what would be the best place to T into for my boost gauge.
thanks ryan
any help would be apprciated
Comment