Announcement

Collapse
No announcement yet.

Msd Install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Msd Install

    hey could anyone tell me how exactly to wire up the mad 6al2 in a mazda bp engine? I have a festiva with a bp swap and a turbo, stratified launch control not working properly so i tried wiring up a msd but now it doesnt start if i wire it up, which instrution in the msd manual should I follow. Its a opitcal sensor in the distributor, checked spark from msd box its good, thanks

    #2
    bump

    Comment


      #3
      throwing a MSD system on an otherwise stock programmed ecu (ignition wise) will be a problem. if you want to run it you need to contact stratified & get it retuned for that type of coil system.
      ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

      1992- project FE3..... 313 WHP @ 9.3psi




      I pet my dash when I get into the car..."good car"
      he actually has a mazda tree, parts grow on it

      Comment


        #4
        Shouldn't it be the same style coil system? Both run off external coil, could I just be running it to the wrong signal wire?

        Comment


          #5
          talk to stratified
          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

          1992- project FE3..... 313 WHP @ 9.3psi




          I pet my dash when I get into the car..."good car"
          he actually has a mazda tree, parts grow on it

          Comment


            #6
            I've talked to lex quite a bit because the launch control would knock off and stop working, anyone ever have this problem? I know I was hooking it up correctly, and I don't want to pay $50 and shipping just to get it diag on

            Comment

            Working...
            X