Club Protege - View Single Post - And so it begins....323BG hatch ----> V6 powa with a few extra surprises

Dan [Sac] · 07-09-2009, 09:00 PM

Today's work:

All I did today was weld holes shut...did about 45 today, and I'm almost halfway done with the holes. A ton of them around when you have the wiring in stock locations (most are for harness plastic clips).

Got the upper rad. support nice & smooth, and the right side (almost said "passenger" side) frame rail half done. By no means is any part done, I just put the etching primer on to not get any corrosion from the night time dew. I will still smooth them over one more time and then fill the stock spot weld divots with body filler for a super smooth look (Rage Xtreme is the ****!)

Weather's been fantastic, other than a few days over 105, it's been mostly low 90s so working outside is nice.

Before:

After:

07-09-2009, 09:00 PM	#134
Dan [Sac] Registered User View My Photo Gallery Join Date: Dec 2007 Location: Sacramento Posts: 668 Merchant Status: (6) Positive Feedback Percent: (100)	Today's work: All I did today was weld holes shut...did about 45 today, and I'm almost halfway done with the holes. A ton of them around when you have the wiring in stock locations (most are for harness plastic clips). Got the upper rad. support nice & smooth, and the right side (almost said "passenger" side) frame rail half done. By no means is any part done, I just put the etching primer on to not get any corrosion from the night time dew. I will still smooth them over one more time and then fill the stock spot weld divots with body filler for a super smooth look (Rage Xtreme is the **!) Weather's been fantastic, other than a few days over 105, it's been mostly low 90s so working outside is nice. Before: After: __________________ '90 Mazda 323** - V6 KLDE, supercharged, right-hand drive, To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. '93 Ford Probe GT - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 10.24 @ 139.5 mph [16 psi] - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 490whp, 447 wtq @ 20psi - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.