i was looking online and calling stealerships to see if i can find the piece that connects to the back of the front lower control arm where the rear bushing is.the 1st dealership i called said that there are 2 different part numbers 1 for the dx and 1 for the lx. the next one i called said the same but told me one said soft and the other is hard. im guessing the lx=hard and dx=soft. now i have the poly zx2 kit. so heres my question
if i order the dx(soft) and take that bushing out and put my polys in would it fit in my lx?
the reason i ask this is cause there is a $30 difference. if its just the stiffness of the bushing i'll just order the dx. because the poly is going in that bushings place. but if there is a size difference then i will order the lx one.
thanks
BUSHINGS, 323, Protege, Rear, 2WD, SOHC, Right 91-94 $22.76
BUSHINGS, 323, Protege, Rear, 2WD, DOHC, Right 92-94 $53.66
its number 5
if i order the dx(soft) and take that bushing out and put my polys in would it fit in my lx?
the reason i ask this is cause there is a $30 difference. if its just the stiffness of the bushing i'll just order the dx. because the poly is going in that bushings place. but if there is a size difference then i will order the lx one.
thanks
BUSHINGS, 323, Protege, Rear, 2WD, SOHC, Right 91-94 $22.76
BUSHINGS, 323, Protege, Rear, 2WD, DOHC, Right 92-94 $53.66
its number 5
Comment