Announcement

Collapse
No announcement yet.

Need help on installing MAP-ECU in 1.6 LX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help on installing MAP-ECU in 1.6 LX

    Hello people
    I need help in installing the MAP-ECU on my supercharged 1.6 LX. I cannot make any further upgrades with the restrictive and bothersome MAF system on these cars...
    What I precisely need to know is which wire is the air intake temp wire and which is the air flow signal wire coming from the MAF to the ECU? There are 5 wires in the MAF connector: black (ground), white w/ red stripe (power), green with black stripe (?), blue with white stripe (?) and a beige/orange/vomit colored wire (?). Also can anyone tell me what wire is the TPS signal and the negative coming from the coil?
    I have the PCM manual for the 1.6 ZM DE, but it has up to 104 pins indicated on it, whereas the PCM connectors are a 26 pin, 16 pin, and 22 pin. That makes 64 pins, so I suppose you need the SSS 104 pin spreadout connector to be able to figure what pin is what. Is this right?
    Please help anyone!
    Thanks
    Motamazda
    mota mazda
Working...
X