Here are all the software settings for a working and tuned MegasquirtI as of March 9, 2006. It is a running the high resolution code h09c and built on a V3.0 PCB
Engine Setup: BPT motor, VJ23 turbo, GTR intake manny, distributor and single coil ignition, 460cc injectors, 4 wire TPS, stock CLT sensor, GM open air IAT sensor.
The maps are good to 21psi but on such a large turbo, you'd need 550ccs to take it there.
Hope this helps out anyone going Megasquirt - trust me, you will thank me later .
It is a zipped file containing a Word document with screenshots.
Someone should make this a sticky.
Engine Setup: BPT motor, VJ23 turbo, GTR intake manny, distributor and single coil ignition, 460cc injectors, 4 wire TPS, stock CLT sensor, GM open air IAT sensor.
The maps are good to 21psi but on such a large turbo, you'd need 550ccs to take it there.
Hope this helps out anyone going Megasquirt - trust me, you will thank me later .
It is a zipped file containing a Word document with screenshots.
Someone should make this a sticky.
Comment