Page 98 of 98 FirstFirst ... 4888969798
Results 1,456 to 1,470 of 1470

Thread: My FE3 progress thread

  1. #1456
    E-Throttle=garbage 300zxrb26dett's Avatar
    Join Date
    May 2008
    Location
    Phoenix
    Posts
    2,798
    Feedback Score
    16 (100%)
    Full Race for a decent price?

    They dont sell anything for less than $1000. Likely the only one they ever made for a FWD BP I had and sold it, and the buyer sold it to someone else.


    Ryan, glad you like the injectors. I have bigger ones coming should you ever need any.
    92 Mazda MX3 GS>KLDE swapped-K8 heads-KLZE cams-Milly intake/thermal spacers-shorty headers-3" cat back exhaust
    ProSport gauges-15x8 wheels. Mitsubishi ECU setup in the works
    94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU
    "Hold yourself accountable before you are held accountable"
    EV14 330cc@3Bar injector kits available.
    EV14 GT500 injector kits available for the BP. 610cc@3Bar. PM me
    EV14 925cc@3Bar injector kits available
    BP forged H beam rods will be coming soon
    KL forged H beam rods in the planning stages


  2. #1457
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    whoa. i was looking at a smaller EFR turbo. my current turbo is in between a 7067 and a 7670 I was looking to step down to the smaller turbo and get some of the spool & driveability back.
    I've lost the urge to shoot for high power numbers. i want something spunky and reliable
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  3. #1458
    ダンスは犯罪じゃない。 atomicEGT's Avatar
    Join Date
    Mar 2005
    Location
    305
    Posts
    7,998
    Feedback Score
    27 (100%)
    Synapse BOVs are trash

    also does this thing look cool yet?


    03 Accord DX: K24/5MT, peasant-spec old man's car
    92 240SX: KA/T25, nerd mobile

  4. #1459
    Gravel Road King
    Join Date
    Oct 2012
    Location
    Salem Oregon
    Posts
    223
    Feedback Score
    0
    from what I understand there is frame b1 and b2, you can interchange any parts as long as it is the same frame.
    Not What you build, But HOW.

  5. #1460
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    Quote Originally Posted by atomicEGT View Post
    Synapse BOVs are trash

    also does this thing look cool yet?
    Its hard to make a 323 "look cool" but no, i've been back in college full time so the majority of my time & funds have been allocated elsewhere
    It still needs minor bodywork & a real paintjob.

    as far as the synapse, there's definite room for improvement.
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  6. #1461
    Registered User Wilyb's Avatar
    Join Date
    Jul 2008
    Location
    Ottawa
    Posts
    1,051
    Feedback Score
    5 (100%)
    What are you studying?
    P. S. I like the 5 lug big brake swap ... I'll need to look you up when I get to that point. Better brakes are a must
    93 GT- Li'l Bee (under construction)
    91 GT- all original
    2000 Sierra Stepside 4x4
    2013 Honda Accord V6 coupe - 14.7 sec. 1/4 mile


    My FE3 worklog thread: http://www.clubprotege.com/forum/showthread.php?t=54636
    WilyB's 93 GT rebuild worklog : http://www.clubprotege.com/forum/sho...-93-GT-rebuild



  7. #1462
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    i'll be selling my front setup, altho i can't imagine shipping to the great north would be super cheap.
    gives you the option for mazda 6 brakes(with the extra shim & rotor hubcentric piece + ARP studs)
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  8. #1463
    ダンスは犯罪じゃない。 atomicEGT's Avatar
    Join Date
    Mar 2005
    Location
    305
    Posts
    7,998
    Feedback Score
    27 (100%)
    Quote Originally Posted by FE3-323 View Post
    Its hard to make a 323 "look cool" but no, i've been back in college full time so the majority of my time & funds have been allocated elsewhere
    It still needs minor bodywork & a real paintjob.

    as far as the synapse, there's definite room for improvement.
    no hate, just curious and this thread is super long. also I disagree, I think you'd be able to make one look pretty rad with some simple mods- coils, cool wheels, GTX front bumper with a lip, some of those Feed-style sideskirts, and GTR hood vents and hatch wings...

    are you using the standard Synapse flange or one of the adapters?


    03 Accord DX: K24/5MT, peasant-spec old man's car
    92 240SX: KA/T25, nerd mobile

  9. #1464
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    i have the 2 hole interplay style front bumper(stock rear bumper)
    5 lug with borebet BS 15x7 wheels- i do have GTX sideskirts & a rear upper wing- but along with my foglight grill, none of that has been installed.
    I am rocking the GTR vents too.

    its the standard flange system for the synapse DV which is a ****ing fail.
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  10. #1465
    ダンスは犯罪じゃない。 atomicEGT's Avatar
    Join Date
    Mar 2005
    Location
    305
    Posts
    7,998
    Feedback Score
    27 (100%)
    sounds like you're most of the way there, then (with the possible exception of the wheels- but hey, not my car)

    too bad, if it were something like a Greddy two-bolt I'd just suggest swapping to a different BOV


    03 Accord DX: K24/5MT, peasant-spec old man's car
    92 240SX: KA/T25, nerd mobile

  11. #1466
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    Some Pictures from installing the Hybrid BHA Astina spindles (F2T hubs machined down to fit BG bearings)
    Apparently I Forgot to upload these earlier

    Name:  IMG_1200.jpg
Views: 105
Size:  162.3 KB

    Name:  IMG_1201.JPG
Views: 102
Size:  329.2 KB

    Name:  IMG_1202.jpg
Views: 101
Size:  162.5 KB

    Name:  IMG_0981.jpg
Views: 102
Size:  143.6 KB

    Name:  IMG_0982.JPG
Views: 104
Size:  323.8 KB

    Name:  IMG_0983.jpg
Views: 103
Size:  157.3 KB

    Name:  IMG_0984.JPG
Views: 101
Size:  259.2 KB

    Name:  IMG_0985.JPG
Views: 102
Size:  299.7 KB
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  12. #1467
    I'm on a boat. Kitty's Avatar
    Join Date
    May 2006
    Location
    Oahu, HI/ The ocean
    Posts
    3,153
    Feedback Score
    17 (100%)
    If anything they'd probably help with bump steer a bit as the mounting point (in relation to geometry) looks lower.
    Beater=/= Sleeper

    Quote Originally Posted by kozzman555 View Post
    kitty, you are a hilarious woman
    Quote Originally Posted by HopelessCow View Post
    there is one thing i dunno what is that call,a thing look like a gun, u press the button and stick to the metal and it makes firework, do i need that thing?and what s the philip head screw drivers?
    Using Linux for anything serious besides server or software dev is like using a tin can and a string for telecommunications.

  13. #1468
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    They definitely improved the bumpsteer. its about 50% improved. I need to learn more about proper strut valving. & determine if i need to redo the struts themselves. At the moment im looking at 2.5" progressive springs to try and calm/tame down the front end a bit more.

    ~ 5mm lower and ~12mm further out.
    The spindles themselves increased my camber and caster 1 full degree over running the GD spindles
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


  14. #1469
    Registered User
    Join Date
    Aug 2014
    Location
    St-Jerome
    Posts
    175
    Feedback Score
    0
    Do the mx3 control arms get you any extra caster or only width/camber?

  15. #1470
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    23,784
    Feedback Score
    79 (100%)
    im sure they add camber, caster I wouldn't think so + 15mm outwards at the balljoint definitely makes a change in camber.
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


Page 98 of 98 FirstFirst ... 4888969798

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Goin' Megasquirt (My progress thread)
    By photoeye0 in forum Engine Management & Proper Tuning
    Replies: 307
    Last Post: 08-11-2009, 01:46 AM
  2. Bpt323's FE3 comment thread
    By 323driver in forum Photo/Video Gallery
    Replies: 107
    Last Post: 05-27-2009, 11:35 AM
  3. fe3?
    By iwantyourcar in forum Internet Sightings
    Replies: 4
    Last Post: 01-23-2008, 06:23 PM
  4. New To the Forum, progress thread
    By IAMHOLLYWOOD in forum Exterior/Interior - BJ Chassis
    Replies: 8
    Last Post: 12-17-2007, 07:13 PM
  5. Fe3???
    By photoeye0 in forum Engine and Drivetrain Swaps
    Replies: 4
    Last Post: 11-12-2007, 09:33 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •