anyone here done motor mounts? is it a hard job to do. i think i may need to replace some mounts sense i have some noticeable engine rock but im not sure if i should get into it in my driveway
Announcement
Collapse
No announcement yet.
motor mounts 1.8l
Collapse
X
-
they're not that bad man. your best bet if you're doing both mounts is to drop the crossmember that they sit on. I'd pick up some silicone and fill the new mounts in so they don't flex as much.
JACK.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
oups, thanks Skuce, i was a bit hung over still when I wrote that up :D
It's not that hard NJ, i'd recomment doing AT LEAST the rear one since the front mounts are fairly strong. Rear ones are weak and can be a pain to change sometimes.
JACK.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
3M window weld. I've seen it in autozone.
1993 Protege LX-Midnight's shadow SOLD
1996 Honda CBR600-Wrecked. Damn Honda crippled me
2002 mazda MPV-family truckster SOLD
2010 VW routon
Originally posted by jay.....they totally underestimated the number of gearheads such as myself that have families but refuse to grow the hell up and stop playing with cars, or that otherwise see the utility of having 4 doors. Obviously I ain't alone, as there are a helluva lotta sti and evo here. Bueler? Beuler? Mazda? Mazda?
Comment
-
science experiment bushings
the gob on the left is some polyurethane paint I left in a jar a few days ago. 5 days later it feels almost as hard as the ST bushing beside it.
I'm going to check it again in a few days (walks away mumbling equations) LOL!
Got some black left so I'll try it on a worn out mount
Comment
-
---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
just get the zxtuner inserts for the motor mounts it stiffens them right up i got them in my car big difference in a good waysigpic gtx swap,pacesetter cat back exhaust,civic short shifter,both front and rear upper strut tower bars,high flow cat,,mx-3 lower tie bar,mx-3 front seats,zxtuner poly motor mount inserts,manual seat belt conversion,mx-3 lether shift boot,
come to mazdasnw.com if you live in the northwest
Comment
-
well as we all now know, there's more than 3 ways of stiffening up your mounts. if anyone has any feedback as to how long it took to dry, how easy it was to work with (the material used to fill them) post it up!
JACK.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
I have the Energy Suspension urethane inserts on the GTR. It gave the car a rough feeling at idle but it has a great feel when driving.1991 Mazda 323 GTR Sedan
MODS:
GTR motor swap, F&R Familia strut bars, MX-3 Rear Lower strut tie bar, GTX front bumper, GTX grill, EDM headlights & corners, EDM 323 rear garnish, EDM spoiler, EGT sideskirts, MX-3 seats, GTX steering wheel, EGT glass sunroof, WRX hood scoop (functional!!), and other things that take too much space to list.....
TO DO LIST:
EDM/JDM rear bumper
EDM/JDM power folding mirrors
Repaint car
Comment
Comment