ok heres the scoop
Nova scotia has safty inspections for every car on the road once a year, you may something similar, anyway mines due in nov but i wanted to change the month by going in earlier and set it to aug or sept, cuz noone likes banging nuckles in the freezin cold
so last year i took it to a shop that did the provical inspection, and it needed a few holes patched no biggie all done and passed, now im a firm believer that i can do almost anything to my car that need fixxed, the nitty gritty things like wheel bearing, tie rods etc...
so i was going over my car for the up coming inspection and i look under my car for holes and wamm, my frame is all bend up into the back seat and ****, rusted too, from me driving in the winter without my knowledge of the frame all fnucked!
so needless to say its all banged up so i cannot fix it, the thing is that i have not gone to any shops with lifts other than that safty spot, i went to a muffler shop but they had a tire lift not a frame lift,
the "dent" if you will. is pushed up into the back seat as noted above, right where a frame lift would lift, so needless to say he did it last year and im now just finding out, and i cannot prove that it was him, itd be to damm hard
ok now onto the question, i have a donor car, can i cut out the section of bent frame off that car and have that professionally welded to the bad area of mine and still have it strong?? as it can be lifted again by a lift?
ive taken it to a friend and this has to be done for a pass, my 2nd option is to get a bodyshop to repair it, and thats alot of money i dont got.
ill see what i can do for pictures, its the peice of frame, right infront of the passenger side tire
thanks
Nova scotia has safty inspections for every car on the road once a year, you may something similar, anyway mines due in nov but i wanted to change the month by going in earlier and set it to aug or sept, cuz noone likes banging nuckles in the freezin cold
so last year i took it to a shop that did the provical inspection, and it needed a few holes patched no biggie all done and passed, now im a firm believer that i can do almost anything to my car that need fixxed, the nitty gritty things like wheel bearing, tie rods etc...
so i was going over my car for the up coming inspection and i look under my car for holes and wamm, my frame is all bend up into the back seat and ****, rusted too, from me driving in the winter without my knowledge of the frame all fnucked!
so needless to say its all banged up so i cannot fix it, the thing is that i have not gone to any shops with lifts other than that safty spot, i went to a muffler shop but they had a tire lift not a frame lift,
the "dent" if you will. is pushed up into the back seat as noted above, right where a frame lift would lift, so needless to say he did it last year and im now just finding out, and i cannot prove that it was him, itd be to damm hard
ok now onto the question, i have a donor car, can i cut out the section of bent frame off that car and have that professionally welded to the bad area of mine and still have it strong?? as it can be lifted again by a lift?
ive taken it to a friend and this has to be done for a pass, my 2nd option is to get a bodyshop to repair it, and thats alot of money i dont got.
ill see what i can do for pictures, its the peice of frame, right infront of the passenger side tire
thanks
Comment