What i need to do the swap, from LX tranny to Kia sephia

[Loco_R]

Which are the parts i need to do the swap, as far as i know, i need the axles, the hubs, what else, do i need to change the clutch too, because i don't want to remove the XTD i have recently purchased for the bp engine, what else do i need?

[bomdoutscort]

Kia halfshaft is all you need i'm sure.

[deadly_sleeper]

i just got done swapping the kia tranny, and all you need is the kia intermediate shaft which is sometimes hard to locate and the kia axles.

[therieldeal]

or you could even buy a 26 spline LSD from MFactory, put it in the kia tranny, and keep your stock axles etc.

[Loco_R]

or you could even buy a 26 spline LSD from MFactory, put it in the kia tranny, and keep your stock axles etc.

but the kia axels are stronger? o not? because this looks like a valid option an a very wise one.

[therieldeal]

they are not stronger. they have exactly the same design, and the shafts themselves were actually like 1mm thinner than my stock escort GT axles.

the GSP replacement axles are thicker, but i think that egt/protege lx axles will be thicker too if you buy that brand. i'm talking about brand new axles, not remans.