Announcement

Collapse
No announcement yet.

Two go in and one comes out (Operation body swap)

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Camera sucks as usual and makes everything look bad but here we have it







    Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
    HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
    Soon to be powered by a Precision snail on crack...

    Add me on more pictures of my projects can be found there.

    Comment


      #47
      wish we could of metup when i was down in the area :/
      ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

      1992- project FE3..... 313 WHP @ 9.3psi




      I pet my dash when I get into the car..."good car"
      he actually has a mazda tree, parts grow on it

      Comment


        #48
        yep stupid ****ing fuel pump relay... On a side note, after 4 relays quit working I found some wiring problems that the previous owner had hacked up when installing the car alarm and left them exposed It hasn't happened again since I fixed the harness running below the upper dash.


        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
        Soon to be powered by a Precision snail on crack...

        Add me on more pictures of my projects can be found there.

        Comment


          #49
          ask drew hall how well it looks after a couple of months.
          Cincinnati, ohio Bengals for life
          "Who Dey"

          Comment


            #50
            Originally posted by bomdoutscort View Post
            ask drew hall how well it looks after a couple of months.
            huh? lol
            1993 Ford Escort GT-T
            1992 Mazda Mx3 GS((Parting Out))
            1994 Honda Integra LsVtec-Sold
            1984 Toyota Corolla SR5-Sold
            1983 Ford Ranger-Sold



            My Turbo Escort GT build thread

            My HUGE f/s thread. Go buy!!!

            Myspace yooo

            Comment


              #51
              the carpet, after it was dyed...c'mon man! even i knew that lol
              -Jack

              ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

              91 626 LX - basically stock and pretty slow still
              http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

              01 E53 3.0i - FOR SALE! pm if interested

              91 USDM Protege LX - SOLD! turbo/manifold up for sale!
              http://www.clubprotege.com/forum/showthread.php?t=46606

              Comment


                #52
                awesome machine man. you inspire my own project to come.
                i have a 93 Mercury Tracer and i wanna swap a protege into it xD

                this beast is clean and all pretty, mine wont be so OCD tastic but im gonna clean it up a bit.
                Originally posted by atomicEGT
                having the fastest/most powerful VJ20 is like wanting to **** the prettiest girl in the trailer park

                sure you can do it, but most people aren't gonna be impressed
                93 Merc Tracer - Daily Driver

                Certified:
                CompTIA A+ | CompTIA Network+ | J-std

                Comment


                  #53
                  Updates coming soon... MOAR BOOST!!


                  Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                  HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                  Soon to be powered by a Precision snail on crack...

                  Add me on more pictures of my projects can be found there.

                  Comment


                    #54
                    Teaser, Goodbye vj20... Heeello T3! I just got done media blasting the gtx manifold back to nice and clean looking.



                    Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                    HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                    Soon to be powered by a Precision snail on crack...

                    Add me on more pictures of my projects can be found there.

                    Comment


                      #55
                      Starting to get pissed.. some of the parts that I'm waiting on still haven't showed up yet wanted to at least get most of this done before the weekend.


                      Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                      HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                      Soon to be powered by a Precision snail on crack...

                      Add me on more pictures of my projects can be found there.

                      Comment


                        #56
                        Got some of my needed parts in the mail finally

                        -4an to 10mm x 1.5 oil feed block adapter
                        -4an .065" oil feed flange
                        -4an 12" stainless steel oil feed line
                        1/2 npt oil drain flange (still waiting on the fitting for it)
                        2" to 2.5" coupler
                        M16x1.5mm Garrett banjo water fittings which I had to cut the ends off of and tap for 1/8 npt hose barb fittings so that the hose sizes matched the stock bp ones.

                        That's about it for now as I'm still waiting on more parts to show up.








                        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                        Soon to be powered by a Precision snail on crack...

                        Add me on more pictures of my projects can be found there.

                        Comment


                          #57
                          oil & watercooled garrett??? specs?
                          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                          1992- project FE3..... 313 WHP @ 9.3psi




                          I pet my dash when I get into the car..."good car"
                          he actually has a mazda tree, parts grow on it

                          Comment


                            #58
                            Garrett AiResearch TBO356 50 Trim .42 a/r cold, .48 a/r hot stage 1 turbine wheel, journal bearings. Only the turbine housing and wheel are from the TBO356. The CHRA I bought because the other T3 I was going to use didn't have water cooling. The compressor side is from my other T3.


                            Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                            HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                            Soon to be powered by a Precision snail on crack...

                            Add me on more pictures of my projects can be found there.

                            Comment


                              #59
                              gotta love the interchangeability lol, what do you think you'll put down for numbers with that turbo? stage 1 turbine wheel is how big compared to the stock one?
                              -Jack

                              ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                              91 626 LX - basically stock and pretty slow still
                              http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                              01 E53 3.0i - FOR SALE! pm if interested

                              91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                              http://www.clubprotege.com/forum/showthread.php?t=46606

                              Comment


                                #60
                                Where did you get the -4 an to 10mm x 1.5mm adapter? been looking around and knew some miata guys using them but couldn't remember where they were from.
                                Cincinnati, ohio Bengals for life
                                "Who Dey"

                                Comment

                                Working...
                                X