Announcement

Collapse
No announcement yet.

rallycross GTX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    i like your GTX

    Comment


      #32
      been a while since ma y last post! car is fine! I will need a new engine eventualy.... (It's compressing in the block....) bought some new yokohama rally tire....
      i,ve been doing the rally cross series in my area this year and so far so good! i'm presently second overall and 1st in 4wd categories!!!!! only one rally to go! hope it stays that way! :D

      here is a pic from the last rally!
      Suzuki SX4 AWD 6MT 2010 : Daily driver
      Mazda 323 GTX 1988 : Rally Car
      www.ahurateam.com

      Comment


        #33
        thats awesome! are you in the same class as all the sti's and evo's? if you are thats pretty impressive. sick picture too.
        1988 323 GTX - 16psi Daily

        Comment


          #34
          Yes same class, 4wd open class
          Suzuki SX4 AWD 6MT 2010 : Daily driver
          Mazda 323 GTX 1988 : Rally Car
          www.ahurateam.com

          Comment


            #35
            Now THAT's how Mazdas are meant to be driven!!!!!

            Zoom Zoom, bitches!!

            --sarge

            Comment


              #36
              Anyway, STi were braking before the jump... I wasn't
              Suzuki SX4 AWD 6MT 2010 : Daily driver
              Mazda 323 GTX 1988 : Rally Car
              www.ahurateam.com

              Comment


                #37
                Heh.. amazing what a $3,000 car vs a $36,000 car can do... How do you like your sx4? I've considered getting one a few times.

                1988 White GTX - #1 parts
                1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
                1988 Blue GTX - #3 in progress (view here)
                1988 Blue GTX - #4 BPT swapped weekend warrior.
                1988 White GTX - #5 Rally car

                Comment


                  #38
                  The sx4 goes really nice! It's cheap on fuel and insurance, very comfortable and I like the chair like position! And with the iawd winter are fun! It does lack a bit of power but for a daily driver it's ok
                  Suzuki SX4 AWD 6MT 2010 : Daily driver
                  Mazda 323 GTX 1988 : Rally Car
                  www.ahurateam.com

                  Comment


                    #39
                    I did some upgrade lately!, I just installed a new Aluminium Radiator from a protege BG with a slim fan! this thing is kinda huge! new holding mount in the botom and the top need to be made! but it fit there nicely! very flush with the hood though




                    New intercooler since the OEM one didn't fit with the new rad! I'm wainting on the piping that should arrive this week!



                    new custom airbox for the filter since last rally was a disaster for the filter, it was sucking all the dust from under the car and therfore clogging the air filter! so much clogged that it was a pain to get to 4k rpm in 1st gear!!!! The hood was modded nicely to get some fresh air into the box!







                    and a new lightweight custommade front bumper! saved like 30 pounds there! and much easier to put and remove the bumpercover!




                    and some aerocatch hood pin but don't have a picture of them!
                    Suzuki SX4 AWD 6MT 2010 : Daily driver
                    Mazda 323 GTX 1988 : Rally Car
                    www.ahurateam.com

                    Comment


                      #40
                      wow, amazing work with the hood. looks great!
                      1988 323 GTX - 16psi Daily

                      Comment


                        #41
                        cool build :D

                        i like the airbox, looks very good! and the hood scoop looks great, not to ricey :D

                        Comment


                          #42
                          im definitely all about that hood mod & the light bar setup going on.
                          the bumper support is almost identical to what i plan for my BG, as the non US bumpers have ZERO crash support :/
                          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                          1992- project FE3..... 313 WHP @ 9.3psi




                          I pet my dash when I get into the car..."good car"
                          he actually has a mazda tree, parts grow on it

                          Comment


                            #43
                            I did the bumper out or 1,5 inch with 0.095 wall DOM tube. Very strong and easily bendable !
                            Suzuki SX4 AWD 6MT 2010 : Daily driver
                            Mazda 323 GTX 1988 : Rally Car
                            www.ahurateam.com

                            Comment


                              #44
                              just found this thread. very impressive build. makes me want to buy my neighbors gtx and build it for rally x, all we have around here is snow rally though.

                              Comment


                                #45
                                very nice work on that vent! looks really clean
                                Sean
                                1988 Mazda 323 gtx
                                1.8 bp-t swap

                                Comment

                                Working...
                                X