Announcement

Collapse
No announcement yet.

Tony's 323 Build Advisory: GTR bits Inside

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    long story short

    the exhaust was not something we had planned on being such a pain, and also the thing we where worst equipped to fix.

    also the turbo outlet pipe that came with the motor was waaay wrong and burned up alot of time redesigning.
    "Discontent is the first necessity of progress."
    -Thomas A. Edison

    "There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."


    *Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
    *Junked* KLZE powered 323 on Megasquirt 1
    172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
    New Daily stock 1.6L 1999 Mazda Protege LX

    Comment


      #47
      Originally posted by Ace View Post
      I know... lol First time at the track with a ****ty clutch. I don't think it was gonna get any better.
      hhmm since it was your frist time at the track, y would u run it on a ****ty clutch? time to step it up....and ask md323 how he made 119 whp on a mustang dyno with less mods than u

      Comment


        #48
        I said I would show and I did. lol and it don't matter man. let tony have his thread. lol
        -Steve

        94' Protege < Worklog<SOLD!
        VF10 powered!
        262 Whp & 257 Wtq
        13.1@107

        '02 Suzuki Bandit 600s

        Comment


          #49
          Well the gtr motor start right up @ 8pm Sunday got her all buttoned up and did a little bit of street tuning on it and she purrs like a kitten she didn't start because the kid I bought it off of had the timing and other things all messed up so yea pics to come md323 has themthx again jinx and md323 for all your helpbin making this all possible
          sigpic

          Comment


            #50
            Np problem man! I hope it brings you lots of fun times and good laughs. Your car is welcome to come explode into pieces in my garage anytime


            Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
            HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
            Soon to be powered by a Precision snail on crack...

            Add me on more pictures of my projects can be found there.

            Comment


              #51
              Thx jinx that's awsome to know @least some of us r welcome back
              sigpic

              Comment


                #52
                Good to hear she's up and running
                1993 Protege LX-Midnight's shadow SOLD
                1996 Honda CBR600-Wrecked. Damn Honda crippled me
                2002 mazda MPV-family truckster SOLD
                2010 VW routon

                Originally posted by jay
                .....they totally underestimated the number of gearheads such as myself that have families but refuse to grow the hell up and stop playing with cars, or that otherwise see the utility of having 4 doors. Obviously I ain't alone, as there are a helluva lotta sti and evo here. Bueler? Beuler? Mazda? Mazda?

                Comment


                  #53
                  shes running and running strong, today it should get the new DP made and then tomorrow is our rescheduled dyno appt.
                  "Discontent is the first necessity of progress."
                  -Thomas A. Edison

                  "There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."


                  *Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
                  *Junked* KLZE powered 323 on Megasquirt 1
                  172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
                  New Daily stock 1.6L 1999 Mazda Protege LX

                  Comment


                    #54
                    Thats good to hear, Is it running open DP?
                    I wish I could have helped but there really wasn't anything I could do other then be tool bitch and I didn't even know whose were whose and everything..lol
                    -Steve

                    94' Protege < Worklog<SOLD!
                    VF10 powered!
                    262 Whp & 257 Wtq
                    13.1@107

                    '02 Suzuki Bandit 600s

                    Comment


                      #55
                      So the car has a fitting dp now sounds good its very hard to stay out of boost
                      sigpic

                      Comment


                        #56
                        I wanna run that sucker before you leave I'll be up at HP tomorrow when it's getting tuned, just let me know when you leave and I'll head up there.


                        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                        Soon to be powered by a Precision snail on crack...

                        Add me on more pictures of my projects can be found there.

                        Comment


                          #57
                          Originally posted by M323 View Post
                          So the car has a fitting dp now sounds good its very hard to stay out of boost
                          sweet, who made it? You should swing by vero on your way back
                          -Steve

                          94' Protege < Worklog<SOLD!
                          VF10 powered!
                          262 Whp & 257 Wtq
                          13.1@107

                          '02 Suzuki Bandit 600s

                          Comment


                            #58
                            how close were my maps?
                            Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
                            ... The first FWD BG with a Toyota E153 transmission conversion in the USA!
                            Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts

                            Comment


                              #59
                              Sounds good jinx ill email u on ur way home
                              sigpic

                              Comment


                                #60
                                ^ huh?


                                Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                                HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                                Soon to be powered by a Precision snail on crack...

                                Add me on more pictures of my projects can be found there.

                                Comment

                                Working...
                                X