Announcement

Collapse
No announcement yet.

A bunch of BF 323, Ford Escort, Mazda protege parts CHEAP CHEAP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    A bunch of BF 323, Ford Escort, Mazda protege parts CHEAP CHEAP

    Updated 2/2/12, Protege trunk release sold.

    Updated 1/25/12, Protege gauge cluster and protege steering wheel sold.

    Last time all this stuff will be posted, anything left after March 31 is being thrown out. All prices are negotiable, and I have no problem shipping at buyers expense.

    Mazda Protege BF 323 Grille, beige. $8 obo.


    Ebay universal racing wheel, $10 obo.


    Ford Escort 1.9L Valve cover with oil cap, $10 obo.


    Ford Escort 1.9L Radiator fan (worked when removed) $20 obo.


    Pretty sure these are Ford Escort Brake calipers, they are stamped 14 on the left of the center of the caliper and 22V to the right of the center. They have brake pads with fair life left. $40 for both obo.





    Ford Escort 1.9L Starter motor, came off an auto trans. (worked when removed) $25 obo.



    Mazda 323 GTX trans mount with all rubber gone, could maybe be repaired/Welded? $5 obo.


    Drivers Side Ford Escort Power side view mirror, $10 obo.


    Mazda 323 BF SE cv axles, bought these for my GT and lost the receipt before I realized I had bought the wrong axles. They have never been installed, the one has some very light surface rust from being in the trunk of one of my cars when it rained and leaked in on it. $50 obo for both.




    Mazda Protege BG Glove Box door, grey/beige in color, $5 obo.



    Ford Escort wagon washer fluid bottle with motor/pump for rear window, $5 obo.


    Mazda Protege BG under headlight trim piece green, $5 obo.


    Mazda Protege BG AFM with intake box, $10 obo.



    Click the link for more stuff:
    more BF/BG/Escort parts for sale
    Last edited by TRRC; 02-02-2012, 08:23 PM.

    #2
    now that's variety! good luck with the sale!
    -Jack

    ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

    91 626 LX - basically stock and pretty slow still
    http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

    01 E53 3.0i - FOR SALE! pm if interested

    91 USDM Protege LX - SOLD! turbo/manifold up for sale!
    http://www.clubprotege.com/forum/showthread.php?t=46606

    Comment


      #3
      if you were close i would grab the hoosiers. glws free bump
      91 protege gt. dropzone mx3 springs, mx3 crossmember, ractive front and rear strut braces, rear lower mx3 brace, 4 wheel disc brakes, corksport ss brake and clutch lines,kvr front pads, ractive cai,ram air hood scoop, modified front bumper, shaved ant and rear trunk lock, fubu ant, short shifter, corksport bronzeoil shifter bushings,92 glass sunroof and tail lights, mx3 center console, autometer gauges (volt and oil pressure) cluster needles painted to match, sound system, 17 inch eagle alloy 193 with 205 40 17 rubber. klze is ALIVE BABY!! . http://www.cardomain.com/ride/2394656http://www.toprotege.com/forums/show...hlight=project[url]

      Comment


        #4
        dibs on the Hoshinos, how much shipped to 06415?

        a few quick questions- do you have the hardware for them, and any more pictures?
        Last edited by atomicEGT; 09-29-2011, 07:17 AM.
        sigpic

        03 Accord DX: K24/5MT, peasant-spec old man's car
        92 240SX: KA/T25, nerd mobile

        Comment


          #5
          might be interested in those tinted red tails. let me know what cost would be with shipping to 97223


          NW MAZDAS

          Comment


            #6
            more pictures of the hoosiers??
            ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

            1992- project FE3..... 313 WHP @ 9.3psi




            I pet my dash when I get into the car..."good car"
            he actually has a mazda tree, parts grow on it

            Comment


              #7
              Originally posted by atomicEGT View Post
              dibs on the Hoshinos, how much shipped to 06415?

              a few quick questions- do you have the hardware for them, and any more pictures?
              I do have all the hardware, I just took that one apart so i could clean it up a bit. I do not have any centercaps. I will get you some better pics tomorrow and a shipping estimate once i weigh them.

              Comment


                #8
                Originally posted by bogaut View Post
                might be interested in those tinted red tails. let me know what cost would be with shipping to 97223
                PM sent.

                Comment


                  #9
                  Originally posted by FE3-323 View Post
                  more pictures of the hoosiers??
                  I will take more pics tomorrow for you.

                  Comment


                    #10
                    how much for the accord bumper shipped to 14141? If you take pallet wrap and fold the sides in and wrap it they should be able to ship it fairly cheaply.
                    2011 BMW 128i 6 Speed Manual -- dd
                    1990 Protege 4WD 5 Speed

                    Comment


                      #11
                      Originally posted by TRRC View Post
                      I do have all the hardware, I just took that one apart so i could clean it up a bit. I do not have any centercaps. I will get you some better pics tomorrow and a shipping estimate once i weigh them.
                      sick, thanks. I don't know if you've shipped wheels before, but a friend of mine who's done it a lot recommended basically making a wheel sandwich with cardboard on both outer faces and in between the two wheels, and then wrapping them up with packing tape- he said it's a good way to protect them and actually keeps shipping costs down...
                      sigpic

                      03 Accord DX: K24/5MT, peasant-spec old man's car
                      92 240SX: KA/T25, nerd mobile

                      Comment


                        #12
                        would those rotors work for a 96 protege? might be noob question....if so though whats the condition because i need to put some new brakes on my protege lol

                        Comment


                          #13
                          Originally posted by TRRC View Post
                          I do have all the hardware, I just took that one apart so i could clean it up a bit. I do not have any centercaps. I will get you some better pics tomorrow and a shipping estimate once i weigh them.
                          More pics of the Hoshino's. One of them does have some unusual wear around the lug holes. The guy I bought them from said that he drove on them with Factory style lug nuts and they were fine. They are at least a two piece wheel but I think they are 3 piece. They are 15x7 with a 15-20ish offset in the current configuration.
                          Click image for larger version

Name:	DSCF3031.jpg
Views:	1
Size:	121.2 KB
ID:	1229355
                          Click image for larger version

Name:	DSCF3032.JPG
Views:	1
Size:	264.0 KB
ID:	1229356
                          Click image for larger version

Name:	DSCF3033.JPG
Views:	1
Size:	264.1 KB
ID:	1229357
                          Click image for larger version

Name:	DSCF3034.JPG
Views:	1
Size:	278.4 KB
ID:	1229358
                          Click image for larger version

Name:	DSCF3035.JPG
Views:	1
Size:	287.8 KB
ID:	1229359
                          Click image for larger version

Name:	DSCF3036.jpg
Views:	1
Size:	121.5 KB
ID:	1229360
                          Click image for larger version

Name:	DSCF3037.JPG
Views:	1
Size:	306.6 KB
ID:	1229361
                          Click image for larger version

Name:	DSCF3038.jpg
Views:	1
Size:	128.5 KB
ID:	1229362
                          Click image for larger version

Name:	DSCF3039.JPG
Views:	1
Size:	307.7 KB
ID:	1229363
                          Click image for larger version

Name:	DSCF3040.JPG
Views:	1
Size:	263.3 KB
ID:	1229364
                          Click image for larger version

Name:	DSCF3041.jpg
Views:	1
Size:	140.5 KB
ID:	1229365

                          Comment


                            #14
                            Originally posted by FE3-323 View Post
                            more pictures of the hoosiers??
                            The DOT's are all from 2008 and 2009, one does have a tiny nick in the bead which I photo'd.
                            Click image for larger version

Name:	DSCF3001.jpg
Views:	1
Size:	140.0 KB
ID:	1229366
                            Click image for larger version

Name:	DSCF3002.JPG
Views:	1
Size:	281.8 KB
ID:	1229367
                            Click image for larger version

Name:	DSCF3003.JPG
Views:	1
Size:	323.4 KB
ID:	1229368
                            Click image for larger version

Name:	DSCF3004.JPG
Views:	1
Size:	287.0 KB
ID:	1229369
                            Click image for larger version

Name:	DSCF3005.JPG
Views:	1
Size:	239.1 KB
ID:	1229370
                            Click image for larger version

Name:	DSCF3006.JPG
Views:	1
Size:	312.7 KB
ID:	1229371
                            Click image for larger version

Name:	DSCF3007.jpg
Views:	1
Size:	132.8 KB
ID:	1229372
                            Click image for larger version

Name:	DSCF3008.JPG
Views:	1
Size:	291.9 KB
ID:	1229373
                            Click image for larger version

Name:	DSCF3009.JPG
Views:	1
Size:	310.7 KB
ID:	1229374
                            Click image for larger version

Name:	DSCF3010.JPG
Views:	1
Size:	286.0 KB
ID:	1229375
                            Click image for larger version

Name:	DSCF3011.JPG
Views:	1
Size:	230.0 KB
ID:	1229376
                            Click image for larger version

Name:	DSCF3012.JPG
Views:	1
Size:	243.7 KB
ID:	1229377
                            Click image for larger version

Name:	DSCF3013.JPG
Views:	1
Size:	251.3 KB
ID:	1229378
                            Click image for larger version

Name:	DSCF3014.JPG
Views:	1
Size:	283.2 KB
ID:	1229379
                            Click image for larger version

Name:	DSCF3015.JPG
Views:	1
Size:	324.5 KB
ID:	1229380

                            Comment


                              #15
                              Originally posted by nerd racing View Post
                              how much for the accord bumper shipped to 14141? If you take pallet wrap and fold the sides in and wrap it they should be able to ship it fairly cheaply.
                              Right now the bumper still has the inner support/crash bar attached, I'm assuming you don't want that? I don't know how easily the sides will fold in and I'm worried they would be permanently damaged by doing so. I will get you a shipping quote this week in case you are still interested.

                              Comment

                              Working...
                              X