how to do a double flare so to start off you will need these tools to do your broken brake lines
![Click image for larger version
Name: IMG_0688.JPG
Views: 3
Size: 177.9 KB
ID: 1267192](filedata/fetch?id=1267192&d=1543743920)
once you have cut your line in a place where it is not rusted place you male fitting on the line if you do not you will have to cut off you flare you just did and redo it , and that is a pain in the ass did it twice today
![Click image for larger version
Name: 1.JPG
Views: 2
Size: 117.8 KB
ID: 1267193](filedata/fetch?id=1267193&d=1543743920)
so once your fitting is on the line place the flare bars on the line make sure there is enough line sticking past the tool, you do this by using the shoulder of the adapter disc for the appropriate size of brake line that you have so in my case 3/16 once you have enough sticking out tighten the wing nuts done once you think there tight do it some more because it will move and you flare will **** up
![Click image for larger version
Name: 2.JPG
Views: 2
Size: 102.8 KB
ID: 1267194](filedata/fetch?id=1267194&d=1543743920)
now get the clamp and start to screw it in till the adapter disc sits flat on the flare bars that gives you your basic single flare not as good as double
![Click image for larger version
Name: 3.JPG
Views: 2
Size: 124.4 KB
ID: 1267195](filedata/fetch?id=1267195&d=1543743920)
![Click image for larger version
Name: 4.JPG
Views: 2
Size: 138.3 KB
ID: 1267196](filedata/fetch?id=1267196&d=1543743920)
now screw the clamp in to the single flare till it gets tight and that should give you your double flare
![Click image for larger version
Name: 5.JPG
Views: 2
Size: 98.3 KB
ID: 1267197](filedata/fetch?id=1267197&d=1543743920)
if it doesnt look like this it means you forgot your fitting so start over as i said i forgot it twice
ps.. i know the pics are **** yell at apple for there camera in there phone
once you have cut your line in a place where it is not rusted place you male fitting on the line if you do not you will have to cut off you flare you just did and redo it , and that is a pain in the ass did it twice today
so once your fitting is on the line place the flare bars on the line make sure there is enough line sticking past the tool, you do this by using the shoulder of the adapter disc for the appropriate size of brake line that you have so in my case 3/16 once you have enough sticking out tighten the wing nuts done once you think there tight do it some more because it will move and you flare will **** up
now get the clamp and start to screw it in till the adapter disc sits flat on the flare bars that gives you your basic single flare not as good as double
now screw the clamp in to the single flare till it gets tight and that should give you your double flare
if it doesnt look like this it means you forgot your fitting so start over as i said i forgot it twice
Comment