I have a few leftover sets of Delrin crossmember bushings for the 2wd BG/EC chassis. $50 per set + shipping. Shipping is $5 for the US, $13 for Canada, and $17 for International.
You need to use the longer 17.5mm front shoulder bolts that came on the later year cars (I have a few sets of bolts/washers for an additional $3). Also, only three of the four bushings fit on a 4wd.
The following two installed pics are from Ace. Rest of his pics are here.
For more details on the bushings, additional install pics, and reviews see the original thread here (I took over the group buy at around page 3):
I have three sets of Kia axles for $35 plus shipping. The top two sets look like junk yard pulls. The top set I got from trailrider098 when I bought his Quaife LSD. The second set was from MD323. The bottom set is a reman'ed set I purchased locally, it has a torn boot that I siliconed up immediately - this was the set that I had in my own car before swapping to the Toyota transmission.
Edit: Reman'ed set of axles sold to Ace.
Thanks,
--Ferdi
You need to use the longer 17.5mm front shoulder bolts that came on the later year cars (I have a few sets of bolts/washers for an additional $3). Also, only three of the four bushings fit on a 4wd.
The following two installed pics are from Ace. Rest of his pics are here.
For more details on the bushings, additional install pics, and reviews see the original thread here (I took over the group buy at around page 3):
I have three sets of Kia axles for $35 plus shipping. The top two sets look like junk yard pulls. The top set I got from trailrider098 when I bought his Quaife LSD. The second set was from MD323. The bottom set is a reman'ed set I purchased locally, it has a torn boot that I siliconed up immediately - this was the set that I had in my own car before swapping to the Toyota transmission.
Edit: Reman'ed set of axles sold to Ace.
Thanks,
--Ferdi
Thanks again to member gooseinyou for the familia garnish 
Comment